Small Brush Truck
Specs
Chassis:
2024 F450 Regular Cab 4×4 Ford with XL Trim painted Race Red
60” CA with 16,500 lb. GVWR
7.3LGasoline Engine
40/20/40 Vinyl Split Bench seat with middle section removed for console
10–Speed Torque Shift Automatic Transmission with OD & Limited Slip Rear End
Chassis: Add Ons
Front End Replacement Style Brush Guard with winch mount
Black side step bars for regular cab
Graphics Package
Body:
Custom Flatbed Aluminum Body, 114” Long X 96” Wide
Headache rack for light bar mounting with Lightbar Protection Cage
Walkway behind cab with gates with slam latch and safety latch
Flexible Strap Step at each walkway entrance
8” Rear Bumper with receiver tube
Rear Underbody Storage Compartment with drop down door
Rear Tow Hooks to chassis frame rails
Turtle Tile in each compartment and hose tray
Electrical:
1-Plastix Plus Console with storage box and padded arm rests
1-Wildfire 225 Amp Relay with Master Disconnect Switch
1-Whelen Warning light Package with cencom CORE
2-Whelen NANO6 LED Work Lights mounted at rear of truck
2-Whelen NANO6 LED Work Lights mounted at headache rack
2-LED step lights one at each walkway gate
3-LED Compartment Lights
1-Kussmaul Battery Charger with Super Auto Eject mounted at left rear of body
1-Warn ZEON-12 12,000 lb. front mounted electric winch
1-FRC Wireless Back Up Camera with 7” Color Monitor mounted in the cab
1-Rigid 20” Off Road LED lightbar mounted at front bumper
2-Streamlight Survivor LED flashlights mounted in the cab
1-Setcom wireless Intercom System with interface for one radio and two wireless headsets
Skid:
300-gallon Water Poly Tank with Limited Lifetime Warranty
Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine with Exhaust Primer
Pump motor fuel plumbed to chassis fuel source
One Hannay Electric Hose Reel Painted Red and Mounted for Rear Deployment Passenger Side
Class 1 Electronic LED water level Indicator mounted at the rear of the truck with an additional display in the walkway and a mini display in the cab
Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
One 1.5” discharge at bulkhead with gated wye and 1 ½” x 1” reducers for whip lines
One 1.5” Discharge Valve, with 1 ½” x 1” chrome reducer, cap & chain
One 2.5” Discharge Valve with chrome adapter, cap & chain
One 1” Tank Fill / Re-Circulate Valve
One 2.5” Tank to Pump Valve
One 2.5” Suction Valve with chrome swivel adapter, plug & chain
Two front corner bumper spray nozzles with electric valves controlled in the cab
Hale auxiliary pump control panel mounted in the cab console