Author Archive

Chassis: CUSTOMER SUPPLIED

• 2022 Ford F550 Super Cab, 4×4, Painted Ford Race Red
• 179” Wheelbase with 60” CA
• Chassis Add On’s:
• Front End Replacement Style Brush Guard with winch mount
• Black Step Bars for Super Cab
• 2.5” DBL Lift Kit
• Six Goodyear G622 Aggressive Tread Tires
• 4” Gold Reflective Striping with Rear Chevron Striping
• Bluff Dale VFD Lettering
• Custom Rear Poly Cabinet in Rear passenger area for gear storage. 
• Heavy Duty Rear Sway Bar
• Stryker Dual Steering Stabilizer Kit

Body:

• Custom Flatbed Aluminum Body, 114” Long X 96” Wide
• Headache rack light bar mounting & ...

Chassis: Customer Supplied RAM 4500 Regular Cab with 84” CA

Steel Body:

• 11ft Steel Flatbed Body 132” Long X 96” Wide,
• 44” Tall Steel Safety Rails full length on driver side and 36” on passenger side
• Line-X sprayed on Flat Surfaces
• Painted Black
• ADD 4” white reflective stripe down both sides of the bed and across the rear

Tool Baskets & Hose Tray:

• One 24”T x 20”D x 72” Long Tool Box with single lift up door and gas shocks
• One 12”T x 20”W x 72”L Stamped Style Aluminum ...

Chassis: Add Ons

• Front End Replacement Style Brush Guard with 2” Receiver
• Black Step Bars for Regular Cab
• City of Marlin Fire Dept Striping & Graphics
• Chevron Striping on rear of Body
• Chassis: DBL Super Single Conversion:
• Five 20 x 10 Forged Aluminum Wheel Assemblies Powder Coated Black
• Five Continental 335/80R20 MPT81 Tires
• 2017 Gears, Dana 300, 6:17 Ratio
• 2017 Gears, Dana 60, 6:17 Ratio
• Gear Installation Kit
• Speedometer Correction Computer
• Front and Rear 2.5” Lift Kit
• Front and Rear Fox Shocks specifically made for 2.5” lift
• Front Custom Fender Flares

Body:

• Flatbed Aluminum Body, with ...

Chassis: Customer Supplied

• 2023 Ram 5500 Regular Cab
• 60” CA with 19,500 lb. GVWR

Chassis: Add Ons

• Front End Replacement Style Brush Guard with winch mount
• Black Step Bars for Regular Cab
• Davis Mountain Fire Department Graphics  
• 4” White Reflective Striping on Cab and Body
• Chevron Striping on rear of Body

Body:

• Flatbed Steel Body, 112” Long X 96” Wide,
• Walkway at front of body with gates at each end
• Rear Bumper with Receiver Tube
• One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with single lift up ...

CHASSIS IS A 2007 RAM 3500 BED TAKE OFF

CHASSIS ADD ONS:

• FRONT END REPLACEMENT WITH RECIEVER TUBE

BODY & COMPARTMENTS:

• 9’ STEEL BED WITH LINEX ON FLAT BED AND IN MAN WELLS
• ONE 18X18X48  TOOL COMPARTMENT MOUNTED ON PASSENGER SIDE
• ONE 12X18X48 TOOL BASKET MOUNTED ON PASSENGER SIDE
• ONE 18X18X72  TOOL COMPARTMENT MOUNTED ON DRIVER SIDE
• ONE 12X18X72 TOOL BASKET MOUNTED ON DRIVER SIDE

PUMP:

• ROWE RPM2/K19 PUMP WITH 19HP KOHLER EFI GASOLINE ENGINE

• 3’’ PUMP INTAKE, 2.5’’ PUMP DISCHARGE
• ALL VALVES TO BE QUARTER TURN BRASS WATER SERVICE
• ONE 2.5’’ TANK ...

TANK:

• 350 GALLON POLY WATER TANK AND 10 GALLON FOAM CELL

PUMP:

• HALE HPX200 B18 PUMP WITH 18HP BRIGGS & STRATTON GASOLINE ENGINE
• 3’’ PUMP INTAKE, 2.5’’ PUMP DISCHARGE
• ALL VALVES TO BE QUARTER TURN BRASS WATER SERVICE
• STAINLESS STEEL BLOCK DISCHARGE MANIFOLD & PLUMBING
• ONE 2.5’’ TANK TO PUMP VALVE
• ONE 2.5’’ SUCTION VALVE WITH CHROME FEMALE SWIVEL ADAPTER, PLUG & CHAIN
• ONE 1.5’’ DISCHARGE VALVE WITH CHROME ADAPTER, CAP & CHAIN
• ONE 2.5’’ DISCHARGE VALVE WITH CHROME ADAPTER, CAP & CHAIN
• ONE 1’’ HOSE REEL VALVE
• TWO 1” VALVES WITH ...

TANK:

• 600 GALLON POLY INVERTED TEE WATER TANK WITH PUMP PLATFORM
• 10 GALLON FOAM CELL

PUMP:

• HALE HPX200-H20 PUMP WITH 20HP HONDA GASOLINE ENGINE
• 3’’ PUMP INTAKE, 2.5’’ PUMP DISCHARGE AND EXHAUST PRIMER
• ALL VALVES TO BE QUARTER TURN BRASS WATER SERVICE
• 2.5’’ TANK TO PUMP VALVE
• 2.5’’ SUCTION VALVE WITH CHROME FEMALE SWIVEL ADAPTER, PLUG & CHAIN
• STAINLESS STEEL BLOCK DISCHARGE MANIFOLD & PLUMBING
• ONE 1.5’’ DISCHARGE VALVE WITH CHROME ADAPTER, CAP & CHAIN
• ONE 1’’ DISCHARGE VALVE FOR CUSTOMER INSTALLED BUMPER SPRAYS
• ONE 1” HOSE REEL VALVE FOR CUSTOMER INSTALLED ...

• TANK:
• 250 GALLON POLY WATER TANK WITH PUMP PLATFORM
• PUMP MOUNTING PLATE & TWO ADJUSTABLE HOSE REEL MOUNT TRACKS
• LIGHTBAR MOUNTING BRACKET TO EXTEND 28” ABOVE WATER TANK

• PUMP:
• HALE HPX200-B18 PUMP WITH 18HP BRIGGS & STRATTON GASOLINE ENGINE
• 3’’ PUMP INTAKE, 2.5’’ PUMP DISCHARGE
• ALL VALVES TO BE QUARTER TURN BRASS WATER SERVICE
• STAINLESS STEEL BLOCK DISCHARGE MANIFOLD & PLUMBING
• ONE 2.5’’ TANK TO PUMP LINE WITH FOOT VALVE INSIDE THE TANK
• ONE 1.5’’ DIRECT TANK FILL
• ONE 1.5’’ DISCHARGE VALVE WITH 1 ½” X 1” CHROME REDUCER, CAP & ...

TANK:

• 250 GALLON POLY WATER TANK WITH 10 GALLON FOAM CELL
• FILL TOWER AND 3’’ VENT OVERFLOW W/3’’ SUCTION, VORTEX BREAKER, 1’’ NPT TANK FILL & TWO MOUNTING TRACKS

PUMP:

• HALE HPX200 B18 PUMP WITH 18HP BRIGGS & STRATTON GASOLINE ENGINE
• 3’’ PUMP INTAKE, 2.5’’ PUMP DISCHARGE
• ALL VALVES TO BE QUARTER TURN BRASS WATER SERVICE
• STAINLESS STEEL BLOCK DISCHARGE MANIFOLD & PLUMBING
• EXHAUST PRIMER
• ONE 2.5’’ TANK TO PUMP VALVE
• ONE 2.5’’ SUCTION VALVE WITH CHROME FEMALE SWIVEL ADAPTER, PLUG & CHAIN
• ONE 1.5’’ DISCHARGE VALVE WITH CHROME ADAPTER, CAP ...

TANK:

• 500 GALLON POLY WATER TANK WITH PUMP PLATFORM  
• 10 GALLON FOAM CELL

PUMP:

• ROWE RPM2/K19 PUMP WITH 19HP KOHLER EFI GASOLINE ENGINE
• 3’’ PUMP INTAKE, 2.5’’ PUMP DISCHARGE AND EXHAUST PRIMER
• ALL VALVES TO BE QUARTER TURN BRASS WATER SERVICE
• 2.5’’ TANK TO PUMP VALVE
• 2.5’’ SUCTION VALVE WITH CHROME FEMALE SWIVEL ADAPTER, PLUG & CHAIN
• STAINLESS STEEL BLOCK DISCHARGE MANIFOLD & PLUMBING
• ONE 1.5’’ DISCHARGE VALVE WITH CHROME ADAPTER, CAP & CHAIN
• TWO 1” DISCHARGE VALVES WITH SWIVELS AT FRONT OF SKID FOR WHIP LINES
• ONE 1’’ TANK FILL ...