Large Brush Truck

Chassis

  • International Chassis
  • 158” Wheelbase with 90” CA & 33,000 GVWR
  • Diesel Engine
  • 5 Speed Allison 2500 Automatic Transmission EVS
  • Air Brakes, Air Horn, & Air Conditioning
  • 50 Gallon Fuel Tank
  • 4” Reflective Striping with VFD Lettering
  • Custom Heavy Duty Brush Guard with 16,500 lb Winch

Body

  • 12 ft Aluminum Flatbed Body with Gated FF Platforms144” Long X 102” Wide
  • Flatbed body, FF Platforms, Walkway, and Rear Step to be non-skid material
  • One Aluminum Tool Box 24”t x 20”d x 72”L mounted on passenger side with turtle tile
  • One Aluminum Tool Box 24”t x 20”dx 72”L mounted on driver side with turtle tile
  • One Aluminum Tool Basket 12”t x 16”dx 72”L mounted on driver’s side tool box
  • One Aluminum Hose Tray with a capacity of 150’ of 1 ½” fire hose
  • One “Possum Belly” rear underbody storage
  • Four Cable Steps
  • Rear Tow Hooks

Electrical

  • 1-Whelen 295SLSA6 Siren Amplifier with Switch Control
  • 2-Whelen M6 Series Red/ Amber LED Lower Rear Warning Lights
  • 2-Whelen 700 Series Red LED Lower Front Warning Lights
  • 2-Whelen ION Series Red LED Front Intersector Lights
  • 2-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
  • 5-Whelen Red LED marker lights with grommets
  • 2-Whelen Amber LED marker lights with grommets
  • 1-Whelen Liberty 54” 16 LED Light Bar with Front Work Lights & Alley Lights
  • 1-Whelen SA315P Siren Speaker with mounting bracket
  • 2- Betts 12 Flood Lights Mounted at Rear of Tank and 2-Mounted on Brush Guard
  • 1-Havis C-2410 Console
  • 1-Wildfire 225 Relay/Master Disconnect Switch
  • 1-Whelen Back-up alarm
  • 8-Whelen LED Compartment Lights
  • 2-Streamlight SL20XP/LED rechargeable Flashlights Mounted in cab
  • 1-Kussmaul Battery Charger with Super Auto Eject
  • 2-Telescoping Poles with Whelen Pioneer LED Flood Lights, mounted to bulkhead

Skid

  • 800 gallon Poly Tank with 10 gallon integral foam cell and Limited Lifetime Warranty
  • Hale HPX 200-B18 with 18 HP Briggs & Stratton Gasoline Engine with Guzzler Primer
  • One Hannay Electric Hose Reel mounted passenger side for rear deployment with 150’ of 1” Booster Hose and TFT Nozzle
  • 6 Gallon Pump Fuel cell in Poly Housing,
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, Class 1 Intelli-Tank LED tank level gauge
  • One Auxiliary Pump Control Panel located in the cab to include Start, Stop, Throttle, Mini LED Tank Level Gauge and Joy Stick mounted in cab
  • Brass Water Service Valves with Stainless Steel Manifold and Plumbing
  • Cascade “Foam Flo” Class “A” Foam System
  • One 1 ½” Discharge with Gated Wye mounted on bulkhead with two 8’ x 1” whip lines and TFT Nozzles
  • One 1.5” Discharge with Chrome Adapter, Cap & Chain
  • One 2.5” Discharge with Chrome Adapter, Cap & Chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 2.5” Tank to pump Valve
  • One 2.5” Suction Valve with Chrome Swivel Adapter, Plug & Chain
  • Two Front Ground Spray Nozzles with electric valves and in cab controls
  • Front Bumper Mounted Akron 3462 Forestry Monitor, with Joystick controls in the cab
  Related