North Hood County, Texas

Customer Supplied 60” CA Cab & Chassis:

Body:

  • Flatbed Ranch Style Steel Body, 112” Long X 96” Wide, with headache rack
  • Rails down both sides of Bed with protection plates at each front corner
  • Rail on passenger side of Bed to come towards the rear 36” and turn inward
  • Rear Bumper with Receiver Tube
  • Rear Tow Loops
  • Line-X spray on bed liner on flatbed body
  • Bottom of body painted black with Top of body and rails painted yellow
  • Yellow / Red chevron striping
  • One Aluminum Tool Box 24”T x 20”D ...
Continue Reading →

Parker County ESD #3, Texas

Chassis:

  • 2022 Ram 5500 Crew Cab 4×4 Flame Red with 60” CA
  • Super Single Conversion
  • Five 20X10 Forged aluminum wheel assembly powder coated black
  • Five Continental 335/80R20 MPT81 Tires
  • Speedometer Correction Computer
  • AEV Front Custom Fender Flares
  • 2.5” Lift from Wicked Mfg.
  • Chassis: Add Ons
  • Front End Replacement Style Brush Guard with winch mount
  • NFAB Black Step Bars for Crew Cab with drop loops
  • Two Front Tow hooks
  • Top half of cab wrapped
  • Parker County ESD #3 Reflective Striping on Cab, Body,
  • Parker County ESD #3 Lettering
  • Yellow / Red Rear Chevron Striping ...
Continue Reading →

Trinity, Texas

Chassis: ADD Ons

  • White Reflective Striping on Body & Cab  
  • Trinity Vol. Fire Dept. door lettering with Brush 1 on front fenders
  • Chevron Striping on the rear of truck
  • Front End Replacement Brush guard with receiver tube
  • Black Step Bars for Regular Cab
  • Stainless Steel Wheel Covers

Body:

  • 11 ft Aluminum Flatbed Body 132” Long X 96” Wide with headache rack for lightbar mounting
  • Lightbar Protection Cage
  • One Driver side Aluminum Compartment 30”T x 20”D x 72”L  
  • Compartment to have dual lift up doors with gas shocks.
  • One Passenger side ...
Continue Reading →

Kaufman ESD #6 – Forney

Chassis: add ons

  • Front End Replacement Style Brush Guard with Winch Cradle
  • Forney Custom Reflective Striping  
  • Forney Fire Department Lettering with Kaufman County ESD #6 Emblem
  • Rear Chevron Striping
  • NFAB Side Step Bars with drop loops
  • Chassis: Buckstop Version 2.1 Premium Super Single Conversion
  • Speedometer Calibration Module
  • High Arch Fender Flares and Body Modification Kit
  • Five (5) 20X11 Aluminum DOT Compliant Wheels
    Five (5) 335/80r20 Continental Tires
    3-1/2” Coil Springs
    Radius Arms
    Heavy Duty Track Bar Mount
    Shock Absorbers Premium Nitrogen, 35mm shaft, 10 Stage Valve
    Front Heavy ...
Continue Reading →

Bellmead, Texas

WF Chassis Add Ons:  

  • Front End Replacement Style Brush Guard with 2” Receiver for winch
  • Nerf/Step Bars for Super Cab
  • City of Bellmead Graphics and Striping
  • Rear Chevron Striping
  • Remove rear seating and replace with Poly Style Insert for Storage
  • Super Springs Suspension Enhancement System
  • Max Trac 2” Front Leveling Kit
  • Seven (7) Michelin XDS Tires

Body:

  • Flatbed Aluminum Body 114” Long X 96” Wide, Tube Style Rear Bumper
  • One Cross-body aluminum tool box 24”T x 24”W x 96”L with lift up door on each end and roll out tray ...
Continue Reading →

Desoto, Texas

Chassis Add On

  • Havis 811 Console (cut down to access plugs)
  • Setina Center Section Push Bumper for equipment mounting platform
  • ARE V Series Topper Cab High Topper painted Chevy Red Hot 
  • Extend O Bed EB-1572 CSI carrier per Drawing with power drive system
  • Desoto Fire Department Graphics and Striping
  • Rear Chevron Striping

Warning &Electrical:

  • 1-Whelen Cenator Lightbar 54” 16 LEDs with Alley Lights and Take
  •    Down Lights
  • 1-Whelen CENCOM Carbide Siren Amplifier & Switch Control with
  •    CC5K2 Canport option
  • 1-Whelen SA315P Siren Speaker with mounting bracket
  • 2-Whelen M4 Series Red/White LED ...
Continue Reading →

Ellis County ESD #2 – Midlothian, Texas

Chassis Add Ons:

  • Midlothian Fire Department Graphics and Striping
  • Rear Chevron Striping
  • Front End Replacement Brush guard with winch mount
  • Rear Replacement Bumper
  • Black Step/Nerf Bars for Crew Cab
  • ARE Commercial Topper Cab High with rear camera, Topper painted Black 
  •              No Front Window
  •              LH Lift Up Door No Boxes Inside No Glass
  •              RH Lift Up Door No Boxes Inside No Glass
  •              Rear Lift up Full Size Hatch door with No Glass
  • EB1570 Extend O Bed Slide out per drawing with 1300 lb. ...
Continue Reading →

Caddo Fire District #3, Louisiana

C2500 Pick Up:

  • Remove Pick Up Bed
  • Provide and install Cattleman Grille Guard with winch mount.  
  • Body:
  • Flatbed Aluminum Body, 102” Long X 84” Wide
  • One Aluminum Tool Box 18”T x 18”D x 50”L mounted on driver side with single lift up door
  • One Aluminum Tool Basket 12”T x 16”D x 50”L passenger side
  • Turtle Tile shall be in compartment and tool basket
  • Rear Chevron Striping
  • 2” black reflective side striping

Electrical:

  • 1-Havis Console for mounting of radios and siren / switchbox
  • 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
  • 2-Whelen ...
Continue Reading →

Lamar, Texas

Chassis:

  • 2022 F550 Crew Cab 4×4 Ford with XL Trim painted Race Red
  • 60” CA with 19,500 lb GVWR
  • 6.7L Power Stroke Diesel Engine
  • 40/20/40 Vinyl Split Bench seat with middle section removed for console
  • 10–Speed Torque Shift Automatic Transmission with OD & Limited Slip Rear End
  • Chassis: Buckstop Version 2.1 Premium Super Single Conversion
  • Speedometer Calibration Module
  • High Arch Fender Flares and Body Modification Kit
  • Five (5) 20X11 Aluminum DOT Compliant Wheels
  • Five (5) 335/80r20 Continental Tires
  • 3-1/2” Coil Springs
  • Radius Arms
  • Heavy Duty Track Bar Mount
  • Shock Absorbers Premium Nitrogen, 35mm ...
Continue Reading →

Giddings, Texas

TANK:  

  • 400 GALLON POLY WATER TANK WITH PUMP PLATFORM
  • 10 GALLON FOAM CELL
  • 4” FENCE AROUND TOP OF TANK

PUMP:

  • HALE HPX200-H20 PUMP WITH 20 HP HONDA GASOLINE ENGINE
  • 3’’ PUMP INTAKE, 2.5’’ PUMP DISCHARGE AND EXHAUST PRIMER
  • ALL VALVES TO BE QUARTER TURN BRASS WATER SERVICE
  • 2.5’’ TANK TO PUMP VALVE
  • 2.5’’ SUCTION VALVE WITH CHROME FEMALE SWIVEL ADAPTER, PLUG & CHAIN
  • STAINLESS STEEL BLOCK DISCHARGE MANIFOLD & PLUMBING
  • ONE 1.5’’ DISCHARGE VALVE WITH CHROME ADAPTER, CAP & CHAIN
  • ONE 1’’ TANK FILL / RE-CIRCULATE VALVE
  • ONE 1” HOSE REEL VALVE
  • TWO 1” ...
Continue Reading →
Page 1 of 34 12345...»