Athens, Texas

Chassis: 

  • 2017 F450 Crew Cab 4×4 Ford with XL Trim painted Race Red
  • 60” CA with 16,500 lb GVWR
  • V-10 Gasoline Engine
  • 40/20/40 Vinyl Split Bench seat with middle section removed for console
  • 6–Speed Torque Shift Automatic Transmission with OD & Limited Slip Rear End
  • Factory OEM 19.5 Max Traction All Terrain Tires
  • Power Equipment Group to include Power Windows & Power Locks
  • Two Front Tow hooks

Chassis: ADD ONs

  • Front End Replacement Style Brush Guard with receiver tube
  • Black Step Bars for Crew Cab
  • 4” White Reflective Striping on Cab & Body
  • Athens Fire Dept. Door Lettering
  • Lime/Red Rear Chevron Striping
  • Wildfire added Super-Springs suspension enhancement system to the rear. This system helps the rear of the truck carry the load better.

Body:

  • Flatbed Aluminum Body, 114” Long X 96” Wide,
  • Headache rack light bar mounting
  • Catwalk Gated FF platform with self-closers and non-skid coating
  • Rear Underbody Storage with drop down door and divider
  • Black Pipe Style Rear Bumper with receiver tube
  • One Aluminum Tool Box 30”T x 20”D x 78”L mounted on driver side with center bulkhead divider, dual lift up doors and gas struts
  • One Aluminum Tool Box 30”T x 20”D x 78”L mounted on passenger side with NO center bulkhead divider to include dual lift up doors and gas struts
  • One Aluminum Hose Tray 10”t x 20”d x 78”L with single lift up door and gas struts, drop down rear door for hose deployment,  to be mounted on driver side compartment
  • One Aluminum Stamped Tool Basket 10”t x 20”d x 78”L with side lift up door mounted on passenger side compartment
  • PAC Track Aluminum Mounting Board in passenger side compartment
  • Rear Tow Hooks to chassis frame rails
  • Turtle Tile shall be in each compartment and hose tray

Electrical:

  • 1-Plastix Plus area, arm rests, & equipment specific face-plates
  • 1-Wildfire 225 Amp Relay with Master Disconnect Switch
  • 2-Whelen M4 Series Red/White LED Lower Front Warning Lights
  • 2-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
  • 2-Whelen M4 Series Red/White LED Intersector Warning Lights on brush guard
  • 2-Whelen M6 Series Red/Amber LED Lower Rear Warning Lights
  • 2-Whelen M6 Series Red/Amber LED Upper Rear Warning Lights
  • 2-Whelen M6 Series Brake/Tail/Turn LED Lights
  • 2-Whelen M6 Series Back Up LED Lights
  • 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
  • 5-Whelen 2” LED Red Marker Lights
  • 2-Whelen 2” LED Amber Marker Lights
  • 1-Whelen 295SLSA6 Siren Amplifier & Switch Box
  • 1-Whelen SA315P Siren Speaker with mount
  • 1-Whelen 55” Liberty 14 LED Light Bar with Takedown & Alley Work Lights
  • 2-Whelen Nano3 Pioneer LED Work Lights Mounted at headache rack
  • 10-Whelen LED Compartment Lights Wildfire increased this number from 8 to 10
  • 1-Kussmaul Battery Charger with Super Auto Eject mounted driver side rear
  • 1-Mini LED water tank level indicator mounted in cab
  • 1-Whelen Back-up alarm
  • 1-Warn 10,000 lb. Multi Mount Electric Winch with connections for front and rear operation
  • 2-Whelen Nano6 Pioneer LED Driving Lights Mounted at front bumper
  • 2-Stream-Light Survivor SL90LED Rechargeable Flash Lights mounted on rear of console
  • 2-Maxima LED step lights one at each firefighter platform
  • 1-Maxima Pump Area LED Work Light at hose reel frame. This light was added to increase visibility at the pump area
  • 1-Install Customer supplied radio, coax, and antenna

Skid:

  • 300 gallon Poly Water Tank with 10 Gallon Integral Foam cell & Limited Lifetime Warranty
  • Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine with exhaust primer
  • Pump Fuel Plumbed to Chassis Fuel Tank
  • One Hannay Electric Hose Reel Painted Black in color and Mounted above pump for
  • Rear Deployment
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 LED water tank level gauge
  • Akron Fire Service Valves with Stainless Steel Block Manifold Victaulic couplings
  • Discharges on manifold to have 45 degree down angles
  • One 1.5” discharge at bulkhead with 1 ½” x 2-1 ½” gated wye with 1 ½” x 1” reducers for whip lines
  • One 1.5” Discharge with 1 ½” x 1” reducer and 1” x ¾” GHT Hose bib adapter.  This was changed from a 1” just to make it more versatile
  • One 1.5” Discharge with Valve, chrome adapter, cap & chain
  • One 2.5” Discharge with Valve, 2 ½” x 1 ½” chrome reducer, cap & chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain. Wildfire added a 45 degree turn down on the suction to match the discharge turn downs.
  • Two ground spray nozzles mounted on front bumper with electric valves controlled in the cab with manual valve near the pump

Equipment:

  • Three TFT 1” Adjustable Gallonage Pistol Grip Nozzles
  • 150’ x 1” 800 psi Booster Hose
  • Two 1” x 8’ Whip lines
  • Two Hydrant & Spanner Wrench Set
  • One Service Manual
  • Spare tire & Wheel with 6T jack
  • Three nozzles mounting brackets
  • Twelve PAC Tool Mounting Brackets
  • One 4’ Rubbish Hook
  • One Fire Rake
  • One Round Tip Shovel
  • One Square Tip Shovel
  • One 2.5” Double Male
  • One 2.5” Double Female
  • Two ZICO KD-UH-6-SF-CRS SCBA brackets
  • One Warn 20,000 lb. Snatch block
  • Three 1 ¾” x 50’ sections of white fire hose
  • One 24” Bolt Cutter
  • One Hose Reel Crank
  • One Winch Pull Strap
  • One Winch Controller
  • One Battery Charger Pigtail
  • One PAC Hardware Kit.
  Related
  • No related posts found.