Bellmead, Texas

Chassis: ADD ONS

  • Front End Replacement Style Brush Guard with receiver tube
  • Black Step bars for Super cab
  • Super Springs
  • Provide if needed 2” front leveling kit
  • Lime/Red Chevron Striping on rear of truck
  • Bellmead Fire Department Lettering
  • Bellmead Emblem on roll up doors
  • White Reflective 1-3-1 Striping

Body & Compartments:

  • Flatbed Aluminum Body, 132” Long X 96” Wide,
  • Headache rack light bar mounting with Lightbar Protection Cage
  • Rear Pipe Style Bumper with receiver tube and non-skid surface
  • One rear underbody storage with roll out tray approximately 80” long with turtle tile
  • One 56x41x96 Tranverse compartment shall be located behind the cab
  • One Slidemaster SM2-D.T.B. with gravity locks and top tool board guides shall be provided and mounted cab side
  • PAC dual track to be provided on both sides of tool board
  • One Slidemaster model SM2-D-HD dual direction tray shall be mounted tank side in the compartment.  Turtle Tile shall be provided in the tray
  • One coffin compartment 90 x 27 x 12 shall be provided on top of water tank hinged on cab side and lift assist struts to be provided along with Turtle Tile
  • One 8x10x90 removable poly hose tray to be provided in the transverse compartment.

Electrical:

  • 1-Havis C2410 Console with 13” map book storage with arm rests
  • 1-Wildfire 225 Amp Relay with Master Disconnect Switch
  • 2-Whelen M4 Series Red/White LED Lower Front Warning Lights
  • 2-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
  • 2-Whelen M4 Series Red LED Intersector Warning Lights
  • 2-Whelen M6 Series Red LED Rear Warning Lower Lights
  • 2-Whelen M6 Series LED Brake/Tail/Turn Lights
  • 2-Whelen M6 Series LED Back Up Lights
  • 5-Whelen 2” LED Red Marker Lights
  • 2-Whelen 2” LED Amber Marker Lights
  • 1-Whelen 295SLSA6 Siren Amplifier & Switch Box
  • 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
  • 1-Whelen SA315P Siren Speaker with mount
  • 1-Whelen 10” Continuum LED Flood Light mounted at front bumper switched in the cab
  • 1-Whelen 10” Continuum LED Flood Light mounted at rear of body switched at the rear pump panel
  • 2-Whelen Black MCPBB Micro Pioneer Light mounted side facing one at each end of transverse compartment
  • 4-Whelen LED 27” Tube Lighting mounted vertical, Two at each end of Transverse Compartment
  • 1-Whelen 56” LED Tube light in coffin compartment
  • 1-Kussmaul Battery Charger with Super Auto Eject mounted at left rear of body
  • 1-Whelen Back-up alarm
  • 1-Warn 10,000 lb. multi mount electric winch with wiring connection provided at both front and rear of truck
  • 1-Install customer supplied two way radio and antenna (Motorola XTL1500)
  • WF to provide coax and Antenna
  • 2-Streamlight Vulcan flashlights one each side mounted to tank side wall in transverse compartment above hose tray
  • 1-FRC Back Up Camera with 7” Color Monitor

Skid:

  • 400 gallon Poly Tank
  • Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine
  • Provide WF Custom Aluminum Fuel Tank for Pump Engine
  • One Hannay Electric Hose Reel Painted Graphite and Mounted Driver Side for Rear Deployment
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator located at rear of truck
  • Lighted Control Panel with pressure gauge, throttle, start button, & Class 1 Electronic LED water level Indicator located in cab console
  • Akron Fire Service Valves with Stainless Steel Block Manifold Victaulic couplings
  • One 1.5” Discharge with Valve, with 1 ½” x ¾” GHT adapter, cap & chain
  • One 1.5” Discharge with Valve for front bumper monitor and sprays
  • Use Water Service Valve underneath truck
  • One 1.5” Discharge with Valve for pre-connect hose tray
  • One 2.5” Discharge with Valve, chrome 2 1/2” x 1 ½” reducer, cap & chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain
  • One Akron 3462 Bumper Mounted Monitor with Joy Stick Controls in the cab
  • Two Front Corner Mounted Stainless Bumper Sprays with electric valves controlled in the cab

Equipment:

  • 200’ x 1” Booster Hose for Reel
  • Three Nozzle mounting brackets
  • One TFT 1” Adjustable Gallonage Pistol Grip Nozzle
  • One Protek 1 ½” Adjustable Gallonage Pistol Grip Nozzle
  • One ZICO AC-32 Wheel Choc with QCH-32-H chock holder
  • One Hydrant spanner wrench set with mounting bracket
  • Two 8’ x 2 ½” suction hose with 2 ½” strainer
  • One TFT Pro Pak Portable Foam System
  • Twelve PAC 1003 Tool Lok
  • Six PAC 1004 Handle Lok
  • Two PAC 1070 Jumbo Lok
  • Three 50’ x 1 ½” Fire Hose
  Related
  • No related posts found.