Blanco County ESD #2, Texas

Chassis: Customer Supplied RAM 4500 Regular Cab with 84” CA

Steel Body:

  • 11ft Steel Flatbed Body 132” Long X 96” Wide,
  • 44” Tall Steel Safety Rails full length on driver side and 36” on passenger side
  • Line-X sprayed on Flat Surfaces
  • Painted Black
  • ADD 4” white reflective stripe down both sides of the bed and across the rear

Tool Baskets & Hose Tray:

  • One 24”T x 20”D x 72” Long Tool Box with single lift up door and gas shocks
  • One 12”T x 20”W x 72”L Stamped Style Aluminum Tool Basket mounted on passenger side forward of hose reel
  • One 12”T x 44” x 44” Stamped Style Aluminum Tool Basket mounted on top of water tank
  • One Hose Tray deck mounted on Left side of water tank

Electrical:

  • One Whelen Cenator LED Light Bar with Takedown & Alley Work Lights
  • Two LED Stop Tail Turn Lights
  • Two LED Back Up Lights
  • Two Whelen ION LED Red Driver Side Warning Lights
  • Two Whelen ION LED Red Passenger Side Warning Lights
  • Two Whelen ION LED Red/Amber Rear Warning Lights
  • Five LED Red DOT Marker Lights
  • Two LED Amber DOT Marker Lights
  • Two Maxima LED Rear Work Lights mounted at upper rear tank corners

Skid:

  • 400 Gallon Poly Water Tank Low Profile Tank
  • Hale HPX200-B18 Pump with 18HP Briggs & Stratton Gasoline engine
  • 6 Gallon Aluminum Fuel Tank
  • Hannay Electric Hose Reel Painted Black Mounted for Rear Deployment on Passenger Side
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
  • Brass Water Service Valves  
  • Stainless Steel Block Manifold & Stainless Steel Plumbing
  • Two 1” valves with swivels located at front of skid for whip lines
  • One 1.5” Discharge with Valve, chrome adapter, cap & chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 1” Hose Reel Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain

Equipment:

  • Three 1” Dual Gallonage Twist Shut Off Nozzles
  • 150’ of Booster Hose for Hose Reel
  • Two 8’ x 1” Booster Hose for Whip Lines
  • Three Nozzle Mounting Brackets
  • One WF Manual
  Related
  • No related posts found.