Bon Wier, Texas

Bon Wier, Texas

Southwest Ford Chassis:

  • 2016 F550 Regular Cab 4x4 Ford with XL Trim painted Racing Red
  • 60” CA with 19,000 lb GVWR
  • V-10 Gasoline Engine with Air Conditioning
  • 40/20/40 Vinyl Split Bench seat with middle section removed for console
  • 6–Speed Torque Shift Automatic Transmission with OD & Limited Slip Rear End
  • Six OEM LT245/75Rx17E BSW Tires
  • Front End Replacement Style Brush Guard receiver Tube
  • Stainless Steel Wheel Inserts
  • 4” White Reflective Striping with Bon Weir Volunteer Fire Department Lettering
  • Rear Chevron Striping
Body:
  • Flatbed Aluminum Body, 114” Long X 96” Wide
  • Headache rack light bar mounting
  • Gated FF platform with self closers
  • Rear Bumper with receiver tube
  • One Aluminum Tool Box 30t” x 20d” x 48L” mounted on passenger side with lift up door
  • Pack Track Aluminum Mounting Board in Passenger and Drivers Side Compartments
  • Pack Track Aluminum Mounting Board at front of tank
  • One Aluminum Tool Box 24”t x 20”d x 72”L mounted on driver side with lift up door
  • Rear Underbody Compartment with drop down door
  • One Aluminum Stamped Tool Basket 12”t x 16”d x 72”L mounted on driver side compartment
  • One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
  • Rear Tow Hooks to chassis frame rails
  • Turtle Tile shall be in each compartment and hose tray
Electrical:
  • 1-Havis C2410 Console, Siren amp, switch control, radio and Aux Pump Control
  • 1-Wildfire 225 Amp Relay with Master Disconnect Switch
  • 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
  • 2-Whelen M4 Series Red LED Lower Front Warning Lights
  • 2-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
  • 2-Whelen M4 Series Red LED Intersector Warning Lights
  • 2-Whelen M6 Series Brake/Tail/Turn LED Lights
  • 2-Whelen M6 Series Back Up LED Lights
  • 5-Whelen 2” LED Red Marker Lights
  • 2-Whelen 2” LED Amber Marker Lights
  • 1-Whelen 295SDA1 Remote Siren Amplifier & Switch Box
  • 1-Whelen 55” Legacy 14 LED Light Bar with Takedown and Alley Work Lights
  • 1-Whelen SA315P Siren Speaker with mount
  • 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
  • 2-Whelen Nano3 Pioneer LED mounting to be determined at final inspection
  • 2- Whelen Nano6 Pioneer LED Driving Lights Mounted at front bumper
  • 2-Whelen 2” LED step lights one at each FF platform
  • 1-Whelen 10” Continuum LED Flood Light mounted on front brush guard
  • 8-Whelen LED Compartment Lights
  • 2-Stream Light Rechargeable Flash Lights mounted to rear of console
  • 1-Kussmaul Battery Charger with Super Auto Eject mounted at driver side near cab
  • 1-Mini LED tank level in cab
  • 1-Whelen Back-up alarm
  • 1-Warn 10000 lb Winch with Electrical Connection Front and Rear
Skid:
  • 400 gallon Poly Tank with 10 gallon Foam Cell and Limited Lifetime Warranty
  • Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine
  • Pump Engine Plumbed chassis fuel source
  • One Hannay Electric Hose Reel Painted Graphite and Mounted for Rear Deployment
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
  • Remote Pump control panel (Start, Stop, Throttle and PSI Gauge) mounted in console
  • Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
  • One 1.5” discharge at bulkhead with gated wye for whip lines
  • One 1.5” Discharge with Valve, chrome adapter, cap & chain
  • One 2.5” Discharge with Valve, chrome adapter, cap & chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain
  • Cascade “Foam Flo” Class “A” Around the Pump Foam System
  • One Akron 3462 Bumper Turret with Joystick controls in the cab (Drain Valve)
  • One Whelen NANO6 LED flood mounted to Akron Bump Turret
Equipment:
  • One Hydrant & Spanner Set mounted to rear of driver side tool cabinet
  • Two 1” x 8’ Whip lines
  • Six TFT 1” Adjustable Gallonage Pistol Grip Nozzle and Mounting Brackets
  • Two 100’ x 1” Section of Light Weight Booster Hose
  • Two 50’ x 1” Section of Light Weight Booster Hose
  • Three 50’ x 1.5” Fire Hose for a total of 150’
  • Four 1.5” Adjustable Gallonage Pistol Grip Nozzles
  • Two 6’ Rubbish Hooks with D Handle
  • Two McCleod Tools with Fiber Glass Handle
  • One 24” Bolt Cutter
  • Sixteen Pak Track Mounting Brackets
  • One Stihl MS 250 18” STIHL Chain Saw
  • Five 28” Collapsible Traffic Cones
  • One LED Flare kit with four LED flares, charging cord and carrying case
  Related
  • No related posts found.