Colorado City, Texas

Crew Cab Chassis:

  • 2018 International 7400 SFA 4×4 Crew Cab Rescue Application painted Red
  • 221” Wheelbase with 102” Cab to Axle and 30,740 GVWR
  • Navistar N9 330 HP Diesel Engine
  • Allison 3000EVS 5 Speed Automatic Transmission with Overdrive
  • Driver Control locking rear differential
  • Two Front Tires 315/80R22.5 G291 Goodyear Load Range J 16 Ply
  • Two Rear Tires 385/65R22.5 G296 Goodyear Load Range J 16 Ply
  • 12,000 lb Front Driving Axle
  • 23,500 lb Rear Suspension with 21,000 lb Rear Axle
  • Air Brakes with 13.2 CFM Air Compressor and Bendix Air Dryer with heater
  • 20” front bumper extension
  • Front and Rear S-Cam Brakes
  • Tilting Steering Column with 18” two spoke steering wheel
  • Horizontal Exhaust
  • 190 Amp Leece Neville Alternator
  • AM-FM Radio with two dual cone speakers
  • Single Trumpet Air Horn
  • Back Up Alarm
  • Engine Block Heater
  • 70 Gallon Fuel Tank
  • Power Windows and Door Locks
  • Air Conditioning
  • Air Suspension Driver Seat
  • Front passenger SCBA Seat with ZICO SCBA Bracket and Collision Restraint Strap
  • Three rear SCBA Seats with ZICO SCBA Brackets and Collision Restraint Straps
  • 22.5” Alcoa Aluminum Wheels

Chassis Add Ons:

  • 4” Reflective Striping and Colorado City VFD & CAFS 1 Lettering
  • Lime Yellow/ Red Chevron striping on rear of body and on front bumper
  • Custom Bumper with Heavy Duty Brush Guard with Winch Mount
  • Trash line storage box with capacity of 50’ of 1 ½” Fire Hose

Body:

  • 14 ft Aluminum Flatbed Body 168” Long X 102” Wide with Gated FF Platforms and self closing inward opening gates
  • Grab Handles to be installed on rear of tool boxes
  • One Aluminum Tool Box 30”T x 20”D x 72”L mounted on passenger side with double lift doors & one adjustable shelf with PAC track tool mounting in section of compartment that does not have a shelf
  • One Aluminum Tool Box 30”T x 20”D x 72”L mounted on driver side with double lift doors & one adjustable shelf with PAC track tool mounting in section of compartment that does not have a shelf
  • One Aluminum Tool Basket 12”T x 16”D x 72”L mounted on Passenger side tool box
  • One Aluminum Hose Tray 12”H x 16”W x 72”L with divider mounted on top of driver side compartment.
  • Two Aluminum Underbody tool boxes one each side forward of the rear wheels
  • Headache Rack Lightbar Mounting with Lightbar protection
  • Rear Underbody Storage with drop down door
  • Rear Frame mounted Tow Hooks
  • Rear 2” Receiver Tube
  • Four Strap Steps, one at each gated walkway entrance and two at rear of truck
  • Turtle Tile in floor of each compartment

Electrical:

  • 1-Whelen Liberty 16 LED lightbar with Takedown & Alley work lights
  • 2-Whelen M6 Series LED Red front lower warning lights
  • 2-Whelen M7 Series Red/White LED Front Intersectors
  • 4-Whelen WIONR LED with IONGROM side warning lights, two rear and two midship
  • 2-Whelen M6 Series Red LED Rear Upper Warning Lights mounted on tool boxes
  • 2-Whelen M6 Series LED Scene Lights mounted upper rear
  • 2-Whelen M6K Series Red/Amber Lower LED Rear Warning Lights
  • 2-Whelen M6BTT LED stop/tail/turn Lights
  • 2-Whelen M6BUW LED backup light Lights
  • 5-Whelen T0R00MRR Red LED marker lights with grommets
  • 2-Whelen T0A00MAR Amber LED marker lights with grommets
  • 1-Whelen 295SDA1 Siren Amplifier & Switch box
  • 2-Whelen SA315P Siren Speakers & mounting bracket
  • 2-Whelen NANO3 LED work lights rear tank
  • 4-Whelen PSL1BB LED driving lights mounted on front bumper
  • 1-Master Disconnect Switch
  • 6-Maxima LED Compartment Lights
  • 2-Maxima LED Step lights one at each FF platform
  • 1-Havis C-2411 Console with Mic clips and mic clip brackets
  • 2-ROM Telescoping light pole Whelen Pioneer LED Scene Lights, mounted in walkway area
  • 2-Streamlight SL20XP/LED rechargeable Flashlights Mounted in cab
  • 1-Kussmaul 091-56-12-S-KIT charger with Super Auto Eject mounted at rear of body
  • 1-Warn 16,500# front mounted electric winch

CAFS Skid:

  • 800 gallon Poly Tank with 20 gallon integral foam cell & Limited Lifetime Warranty
  • Hale HPX 200 Pump-175gpm @ 135psi / 200 gpm @ 100psi / 300 gpm @ 25psi
  • Kubota 44 HP Diesel Engine
  • Pump to be plumbed to chassis fuel tank
  • Control Panel with light, pressure gauge, throttle, choke, primer, start button
  • LED water tank level gauge
  • Water Cooled 60 CFM Vanair rotary screw compressor
  • Foam Pro 2001 Class “A” foam injection system
  • Stainless Steel Plumbing with water service valves
  • One 1.5” Solution Water / Plain Water Discharge
  • One 1.5” CAFS / Solution Water / Plain Water Discharge
  • Two 1” Discharge Valves at front of tank for whip lines one CAFS and one solution/water
  • One 1” CAFS / Solution Water / Plain Water Discharge Valve for Hose Reel
  • One 1” Tank Fill / Re-Circulate
  • One 2.5” Suction Valve Chrome Cap & Chain
  • One 2.5’ Plain Water Discharge
  • One 3/8” Re-Circulation Line
  • One Hannay Electric Hose Reel painted graphite mounted passenger side front for side deployment  plumbed for water or foam solution
  • One Hannay Electric Hose Reel painted graphite mounted on driver side front for side deployment plumbed for CAFS
  • Two front ground spray nozzles (water or foam solution) with electric valves for in cab control
  • Class 1 Water LED Level Indicator at pump controls
  • One Mini LED Tank Level Display in Cab
  • One 1 ½” Swivel with Gated Wye, located at front bumper (water or foam solution)
  • One Akron 3462 Bumper mounted monitor (water or foam solution) with Adjustable Gallonage Nozzle and in-cab joy stick controls
  • Monitor plumbing to be painted black

Equipment:

  • Two 6’ x 1” Whip Lines
  • Two 100’ x 1” 800 PSI booster hose (100’ for each hose reel)
  • One Spanner & Hydrant Wrench Set
  • One 1 ½” Pistol Grip Shut Off with 1 1/8” Smooth Bore CAF Tip
  • Two 1” Pistol Grip Shut Off with ¾” Smooth Bore CAF Tip (for whip lines and one hose reel)
  • Four 50’ x 1 ½” DJ Fire Hose  (150’ for hose tray and 50’ for front bumper storage)
  • One Protek 366 1 ½” adjustable gallonage pistol grip nozzle (for front bumper)
  • Two TFT 1” adjustable gallonage pistol grip nozzle (one for passenger side hose reel and one for whip line)
  • Four 5 Gallon Pales Buckeye Class “A” Foam
  • Thirty Six 5 Gallon Pales of Buckeye Class “A” Foam
  • One Whelen TAM 85 LED Traffic Arrow mounted at rear of truck
  • One Cascade “Foam Flo” System
  • Two 2 ½” x 10’ clear suction hose
  • One 2 ½” Barrel Strainer
  • One Horizontal Grab Handle at rear of truck
  • One 6# Flat Head Axe
  • One 6# Pick Head Axe
  • One Fire Flapper
  • One 30” Haligan Bar
  • One 4’ Pike Pole
  • One 6’ Pike Pole
  • One Drip Torch with mounting bracket
  • One Fire Rake
  • One 24” Bolt Cutters
  • One 36” Bolt Cutters
  • One Flir K2 Thermal Imaging Kit
  • One 95 GPM Foam Eductor
  • One 2 ½” x 2-1 ½” Gated Wye
  • One 45 degree Chrome Elbow
  • One 2 ½” FNST x 1 ½” MNST
  • One 2 ½” MNST x 2 ½” MNST
  • One 2 ½” MNST x 2 ½” MNPT
  • One 2 ½” FNST x 2 ½” FNST
  Related
  • No related posts found.