Chassis:
- 2018 F550 Super Cab 4×4 Ford with XL Trim Painted Race Red
- 60” CA with 19,500 lb GVWR
- V-10 6.8LGasoline Engine with 240 Amp Alternator
- 40/20/40 Vinyl Split Bench seat with middle section removed for console
- 6–Speed Torque Shift Automatic Transmission with OD & Limited Slip Rear End
Chassis Add ON’s:
- Front End Replacement Style Brush Guard with Winch Cradle
- Black Tubular Step Bars for Super Cab
- 4” White Reflective Striping,
- Rear Red/Yellow Chevron
- White Reflective FA1 on each side, front, and rear of truck
Body:
- Custom Flatbed Aluminum Body, 114” Long X 96” Wide
- Headache rack light bar mounting with Lightbar Protection Cage
- Gated Walkway with self-closing Gate on each end
- Rear Bumper with receiver tube
- One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door
- Pack Track Aluminum Mounting Board in Driver Side Compartment
- One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with dual lift up doors
- Rear Underbody Compartment with drop down door
- One Aluminum Stamped Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment with side lift up door
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1-Havis Console with armrests, and equipment brackets
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
- 2-Whelen M4 Series Red LED Lower Front Warning Lights
- 2-Whelen ION Series Red LED Rear Side Warning Lights
- 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Series Red LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series Back Up LED Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen 295SLA6 Siren Amplifier & Switch Box
- 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
- 2-Whelen Nano6 Pioneer LED Driving Lights Mounted at front bumper
- 8-LED Compartment Lights
- 2-Night Stick Intrant Rechargeable Flash Lights mounted to rear of console
- 1-Night Stick Lantern Rechargeable Flash Lights mounted under rear seat
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at driver side rear
- 1-Mini LED water tank level in cab
- 1-Whelen Back-up alarm
- 1-Warn ZEON-12 12,000 lb. Winch Front mounted electric winch
- 1-FRC BCA 211A00 Backup Camera with Monitor
Skid:
- 350-gallon Poly Water Tank with Limited Lifetime Warranty
- 10-gallon Poly Foam Cell
- Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine
- Pump fuel line to be plumbed to chassis fuel source
- One Hannay Electric Hose Reel Painted Graphite and Mounted for Rear Deployment
- Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
- Mini Electronic Tank Level in cab
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” discharge at bulkhead with gated wye for whip lines
- One 1.5” Discharge with Valve, chrome adapter, cap & chain
- One 2.5” Discharge with Valve, chrome adapter, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- Cascade “Foam Flo” Around the Pump Class “A” Foam System
- Two Bumper Mounted Ground Spray Nozzles with Electric Valves controlled in the cab
- Two Rear Bumper Mounted Ground Spray Nozzles with Electric Valves controlled in the cab
- One Akron 3462 Forestry Bumper Mounted Monitor with Joy Stick Controls
- Auxiliary Pump Panel with Start, Stop, Choke, and throttle mounted cab center console
Equipment:
- One Hydrant & Spanner Set
- Two 1” x 8’ Whip lines
- Three TFT 1” Adjustable Gallonage Pistol Grip Nozzles
- Three PAC Nozzle Mounting Brackets
- 150’ x 1” Booster Hose
- Eight PAC 1004 Mounting Brackets with hardware
- Two Sections of 10’ x 2.5” Hard Suction Hose
- One 2.5” Barrel Strainer for Hard Suction
- One 2.5” Double Female
- One Kussmaul Battery Charger Pigtail
- One Winch Pull Strap
- One Set of Extra Foam System Tubing
- One Spare Tire & Wheel
- One Drip Torch
- One Drip Torch Bracket