Chassis:
- 2017 F550 Crew Cab 4×4 Ford with XL Trim painted Race Red
- 60” CA with 19,500 lb GVWR
- 6.7L Power Stroke Diesel Engine
- 220 Amp Alternator
- 40/20/40 Vinyl Split Bench seat with middle section removed for console
- 6–Speed Torque Shift Automatic Transmission with OD & Limited Slip Rear End
- 6-OEM 19.5 All Terrain Tires
Chassis: Add Ons
- Front End Replacement Style Brush Guard with Receiver Tube
- Black Step Bars
- Garrett Area Rural VFD Emblems with Truck Number 2691
- Rear Chevron Striping
Body:
- Custom Protech Flatbed Aluminum Body, 114” Long X 96” Wide
- Headache rack light bar mounting
- Gated Walkway with self-closing gates on each end
- Rear Bumper with receiver tube
- One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door
- Pack Track Aluminum Mounting Board in Passenger Side Compartment
- One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with single lift up door
- Rear Underbody Compartment with drop down door
- One Aluminum Stamped Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment with side lift up door
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1-Plastix Plus Console with arm rests, cup holders, storage box, and equipment brackets
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
- 2-Whelen M4 Series Red LED Lower Front Warning Lights
- 2-Whelen ION Series Red LED Rear Side Warning Lights
- 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Series Red LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series Back Up LED Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen Cencom Siren Amplifier & Switch Box
- 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen Nano6 Pioneer LED Work Lights Mounted at rear of tank
- 2-Whelen Nano6 Pioneer LED Work Lights Mounted at Headache Rack
- 2-Whelen Nano6 Pioneer LED Driving Lights Mounted in front bumper
- 1-Whelen 10” Continuum Driving Light Mounted at front bumper
- 2-Telescoping Pole Lights with Whelen LED Pioneer Lights, mounted to bulkhead
- 5-LED Compartment Lights
- 2-Stream Light Rechargeable Flash Lights mounted to rear of console
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at driver side near cab
- 1-Mini LED water tank level gauge in cab
- 1-Whelen Back-up alarm
- 1-Warn 10000 lb. Multi Port Electric Winch with Synthetic Cable, Front & Rear Operations
- 1-Kenwood VHF two-way radio with antenna and coax cable
- 1-FireCom Wireless System to include 5100D Intercom, WB505R Wireless Base, (3) UHW-505 Wireless Headsets, and Radio Interface for Kenwood radio
Skid:
- 400 gallon Poly Water Tank with Limited Lifetime Warranty
- 10 Gallon Foam Cell & Cascade Foam Flo Around the pump foam system
- Rowe RPM2/K19 Pump with 19 HP Kohler Fuel Injected Gasoline Engine
- Six Gallon Custom Aluminum Fuel tank with Gauge
- One Hannay Electric Hose Reel Painted Graphite and Mounted for Rear Deployment
- Lighted Control Panel with pressure gauge, throttle, ignition switch, & start button
- Class 1 Electronic LED water level Indicator
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” discharge at bulkhead with 1 ½” x 2-1 ½” gated wye and 1 ½” FNST x 1” MNST reducers for whip lines
- One 1.5” Discharge Valve, with chrome adapter, cap & chain
- One 2.5” Discharge Valve, with chrome adapter, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- Two Ground Spray Nozzles mounted on front bumper with electric valves controlled in the cab
Equipment:
- One Hydrant & Spanner Set
- Two 1” x 8’ Whip lines
- Two TFT 1” Adjustable Gallonage Pistol Grip Nozzle
- One TFT 1” Bubble Cup Dual Gallonage Nozzle
- 150’ x 1” Booster Hose
- Three 50’ x 1.5” DJ White Fire Hose
- One 1.5” Protek 366 Adjustable Gallonage Pistol Grip Nozzle
- One 6’ Trash Hook w/D Handle
- One FLIR K2 Thermal Camera Kit
- One TFT Pro Pak to include 25’ Hose and Mounting Bracket
- One Spare Tire & Wheel
- One Winch Controller
- One Receiver Tube Stinger with Clevis
- One Service Manual
- One Kussmaul Battery Charger Pigtail
- One Hose Reel Crank
- One PAC mounting Kit
- Three Nozzle Brackets
- One 6T Jack