Chassis:
- 2015 Ram 5500 Regular Cab 4×4 painted Flame Red
- 60” CA with 18,750 lb GVWR
- 6.4L V-8 Hemi Gasoline Engine
- 40/20/40 Vinyl Split Bench seat with middle section removed for console
- 5–Speed Torque Shift Automatic Transmission with OD
Chassis ADD ONS:
- Tires to be replaced with CONTI TERRA PLUS HD3 tires
- Ranch Hand Front End Replacement Style Brush Guard with Winch Cradle
- Step bars for regular cab
- 4” White Reflective Striping
- Customer Supplied Fire Department Lettering
- Lime & Red Rear Chevron Striping
- 2” Body Lift with Super Spring Stabilizer
- Two front tow hooks
Body:
- 9 ft 6 in. Flatbed Aluminum Body, 114” Long X 96” Wide,
- Headache rack light bar mounting with Gated FF platform with self closers
- Rear Bumper with receiver tube
- Rear Underbody Storage with drop down door
- One Aluminum Tool Box 30t” x 20d” x 48L” mounted on passenger side with lift up door
- Pack Track Alum Board mounted in each compartment
- One Aluminum Tool Box 24”t x 20”d x 72”L mounted on driver side with double lift up doors
- One Aluminum Stamped Tool Basket 12”t x 16”d x 72”L mounted on driver side compartment
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1-Havis C2410 Console
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
- 2-Whelen M4 Series Red/White LED Lower Front Warning Lights
- 2-Whelen ION Series Red LED Rear Side Warning Lights
- 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Series Red LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series Back Up LED Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen 295SLA6 Remote Siren Amplifier & Switch Box
- 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen 2” LED step lights one at each FF platform
- 2-Nano6 LED Work Lights Mounted at rear of tank
- 2-Nano6 LED Flood Lights Mounted on Front End Replacement
- 2-Nano6 LED Work Lights Mounted on Headache Rack
- 8-Whelen LED Compartment Lights
- 1-Whelen Back-up alarm
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at left rear of body
- 1-Mini LED tank level in cab
- 2-Telescoping LED Scene Light Pole Mounted Center of Bulkhead
- 1-Warn 12,000 lb. Front mounted electric winch
- 2-Stream Light SL20 Rechargeable Flashlights mounted in cab
- 1-Akron Joy Stick Control mounted in center console
- 1-Safety Vision Back Up Camera with color monitor
- 1-Install Customer Supplied Radio & Antenna
Skid:
- 400 gallon Poly Tank with fill tower at the front of the tank and 10 gallon Foam Cell
- Pack Track Aluminum Mounting Board at front of tank
- Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine
- Pump Engine Plumbed chassis fuel source
- One Hannay Electric Hose Reel Painted Graphite and Mounted for Rear Deployment
- Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
- Auxiliary Pump Control Panel in cab with Start, Stop, Throttle, Joystick Controls and Foam Pro Controller
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” discharge at bulkhead for whip lines
- One 1.5” Discharge with Valve, chrome adapter, cap & chain
- One 1.5” Discharge with Valve, chrome 1 ½” reducer, cap & chain
- One 2.5” Discharge with Valve, chrome adapter, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- Foam Pro 1601 System with Controller in the cab
- One Akron 3462 Bumper Mounted Monitor with Joy Stick Control in the cab
- Two Ground Spray Nozzles with electric valves, nozzles mounted to brush guard
Equipment:
- One Hydrant & Spanner Set mounted to rear of driver side tool cabinet
- Two 1” x 8’ Whip lines
- One 35 GPM Twist shut off nozzle on hose reel
- Two TFT Bubble Cup Nozzles 1”
- One 100’ x 1” Light Weight Booster Hose for Reel
- One 50’ x 1” Light Weight Booster Hose for Reel
- Three 50’ x 1 ½” Fire Hose
- One TFT 1 ½” Bubble Cup Nozzle
- Three Nozzle mounting Brackets
- Spare Tire & Wheel (CONTI TERRA PLUS HD3)
- Seven Take off Tires on pallet
- One Service Manual
- One Winch Controller
- One Hose Reel Crank
- One package of PAC track mounting hardware
- Four SCBA brackets mounted in passenger side compartments