Chassis Add Ons:
- Four ZICO SCBA Brackets and Collision Restraint Straps
- 4” Gold Reflective Striping and Harleton VFD/Harrison County ESD #8 Lettering
- Lime Yellow/ Red Chevron striping on rear of body
- Custom Bumper with Heavy Duty Tube Style Brush Guard and Winch Mount
- Trash line storage box with capacity of 50’ of 1 ½” Fire Hose
Body:
- 14 ft Aluminum Flatbed Body 168” Long X 102” Wide with Gated FF Platforms and self closing inward opening gates
- Hand Rails to be installed on rear of tool boxes
- One Black Powder Coated Aluminum Compartment Driver side 36”t x 20”d x84”
- Driver side Compartment to have double roll up doors and center bulk head.
- Front section of driver side compartment to have PAC Track mounting board
- Rear section of driver side compartment to have adjustable shelf
- One Black Powder Coated Aluminum Compartment Passenger side 36”t x 20”d x 84”L
- Passenger side Compartment to have double roll up doors and center bulk head.
- Rear section of driver side compartment to have PAC Track mounting board
- One Black Powder Coated Divided Hose Tray mounted on driver’s side 84” L x 10” t x 20” w, trays to carry 100’ x 2.5” hose and 200’ x 1.75” Fire Hose
- Black vinyl hose bed cover for hose tray
- One Black Powder Coated Tool Basket, 84”L x 20”w x 10”t mounted on passenger side compartment
- Two Aluminum Underbody tool boxes 36”W x14”Hx16”D one each side in front of rear wheels.
- Rear Underbody Storage with slide out tray
- Rear Frame mounted Tow Hooks
- Rear 2” Receiver Tube
- Six Cable Steps, One at each front cab entrance, one at each walkway entrance, and two at rear
- Turtle Tile in floor of each compartment
Electrical:
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 1-Havis C3010 Console with 13” map book storage
- 2-Whelen M6 Series Red/Amber LED Rear Lower Warning Lights
- 2-Whelen M6 Series Red/Amber LED Rear Upper Warning Lights
- 2-Whelen M6 Series Red/White LED Lower Front Warning Lights
- 2-Whelen ION Series Red LED Rear Side Warning Lights
- 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
- 2-Whelen ION Series Red LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series Back Up LED Lights
- 5-Whelen 2” LED Red Marker Lights & 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen 295SAD1 Remote Siren Amplifier & Switch Box
- 2-Whelen SA315P Siren Speakers with mounts
- 2-Telescoping Poles with Whelen LED Scene Light mounted front of headache rack
- 1-Telescoping Pole with Whelen LED Scene Light mounted at rear of passenger side compartment
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at left rear of body
- 1-Mini LED tank level in cab
- 1-International Back-up alarm
- 4-Sho Me Rechargeable Flashlights mounted in cab
- 1-FRC Wireless Back Up Camera with 7” Color Monitor
- 2-Whelen NANO6 LED work lights at rear pump module
- 4-Whelen NANO6 LED driving lights mounted on front bumper
- 1-Whelen NANO3 LED spot light mounted on Bumper Monitor
- 8-Whelen 18” Tube Style LED Compartment Lights
- 3-Whelen LED Step lights at FF platforms
- 8-Whelen LED Perimeter lights mounted under the body
- 1-Warn 16,500# front mounted electric winch
- 1-Warn Electrical connection for customer’s existing multimount winch at rear receiver.
- 1-FireCom Wireless Intercom System for dual radio set up and to include six (6) wireless headsets.
- 4-12V Cigar lighter plug one near each seat
CAFS Skid:
- 800 gallon Poly Tank with 20 gallon integral foam cell & Limited Lifetime Warranty
- Hale HPX 200 Pump-175gpm @ 135psi / 200 gpm @ 100psi / 300 gpm @ 25psi
- Kubota 44 HP Diesel Engine
- Pump to be plumbed to chassis fuel tank
- Control Panel with light, pressure gauge, throttle, choke, primer, start button
- LED water tank level gauge
- Water Cooled 60 CFM Vanair rotary screw compressor
- Foam Pro 1601 foam injection system
- Stainless Steel Plumbing with water service valves
- One 1.5” Solution Water / Plain Water Discharge
- One 1.5” CAFS / Solution Water / Plain Water Discharge
- Two 1” Discharge Valves at front of tank for whip lines one for CAFS / Solution Water / Plain Water and one for Solution Water/Plain Water
- One 1” CAFS / Solution Water / Plain Water Discharge Valve for Driver Side Hose Reel
- One 1” Solution Water / Plain Water Discharge Valve for Passenger Side Hose Reel
- One 1” Tank Fill / Re-Circulate
- One 2.5” Suction Valve Chrome Cap & Chain
- One 2.5’ Plain Water Discharge
- One 3/8” Re-Circulation Line
- One Hannay Electric Hose Reel painted graphite mounted passenger side front for side deployment plumbed for water or foam solution
- One Hannay Electric Hose Reel painted graphite mounted on driver side front for side deployment plumbed for CAFS
- Two front ground spray nozzles (water or foam solution) with electric valves for in cab control
- Class 1 Water LED Level Indicator at pump controls
- One Mini LED Tank Level Display in Cab
- One 1 ½” Trash Line, Swivel/ Ball Valve, located in front bumper (water or foam solution)
- One Akron 3462 Bumper mounted monitor (CAFS, water or foam solution) with Adjustable Gallonage Nozzle & 1 1/8” smooth bore for CAFS and in-cab joy stick controls.
- Monitor plumbing to be painted black
Equipment:
- Two 8’ x 1” Whip Lines
- Two 100’ x 1” Lightweight booster hose (100’ for each hose reel)
- One Spanner & Hydrant Wrench Set
- One 1 ½” Pistol Grip Shut Off with 1 1/8” Smooth Bore CAF Tip
- Two 1” Pistol Grip Shut Off with ¾” Smooth Bore CAF Tip (one for whip line and one hose reel)
- Four 50’ x 1 ½” DJ Fire Hose (150’ for hose tray and 50’ for front bumper storage)
- One Protek 366 1 ½” adjustable gallonage pistol grip nozzle (for front bumper)
- Two TFT 1” adjustable gallonage pistol grip nozzles (for passenger side hose reel & one whip line)
- Four 5 Gallon Pales of Class “A” Foam