Chassis:
- 2016 F350 Super Cab 4×4 Ford with XL Trim painted Ford Race Red
- 60” CA with 14,000 lb GVWR
- Limited Slip Rear End
- 6.7L Powerstroke Diesel Engine with Operator Commanded Regeneration
Chassis: ADD ONS
- Front End Replacement Style Brush Guard with Receiver Tube
- Super Springs Suspension Enhancement System
- 4” Yellow Reflective Striping
- South Hays FD Lettering with Brush 11
- Rear Chevron Striping
Body:
- Flatbed Aluminum Body, 114” Long X 96” Wide,
- Headache rack light bar mounting
- Gated FF platform with self closers
- Rear Bumper with receiver tube
- Rear Underbody storage with single drop door
- One Aluminum Tool Box 30t” x 20d” x 48L” mounted on passenger side with single lift up door
- One Aluminum Tool Box 24”t x 20”d x 72”L with mounted on driver side with single lift up door
- One Aluminum Side Opening Stamped Tool Basket 12”t x 20”d x 72”L mounted on driver side compartment
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1.5” Fire Hose
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1-Plastix Plus Console
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
- 2-Whelen M6 Series Red/Amber LED Rear Warning Upper Lights
- 2-Whelen M4 Series Red LED Lower Front Warning Lights
- 2-Whelen ION Series Red LED Right Side Warning Lights with white override to turn on with right side alley lights
- 2-Whelen ION Series Red LED Left Side Warning Lights with white override to turn on with left side alley lights
- 2-Whelen M4 Series Red LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series LED Back Up Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen 295SLSA6 Siren Amplifier & Switch Box
- 1-Whelen 55” Legacy 14 LED Light Bar with Takedown and Alley Work Lights to be configured driver side front red-blue-red and passenger side blue-red-blue
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen NANO3 LED Work Lights Mounted at rear of tank
- 2- Whelen NANO6 LED Lights Mounted on front bumper
- 2-Whelen NANO6 LED Work Lights Mounted on driver side tool basket
- 2-Whelen NANO6 LED Work Lights Mounted on passenger side tool Box
- 2-Whelen 2” LED step lights one at each FF platform
- 8-Whelen LED Compartment Lights
- 1-Kussmaul Battery Charger with Super Auto Eject mounted in front bumper tail driver side
- 1-Kussmaul Display to be mounted on center console driver side
- 1-Whelen Back-up alarm
- 1-Safety Vision Back Up Camera with color display
- 1-Multi Mount winch wiring to front of truck
- 1-Multi Mount winch wiring to rear of truck
- 1-WF to cut out hole in console for radio, Customer is installing radio
Skid:
- 300 gallon Poly Water Tank with 10 gallon integral foam cell
- Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine
- One 6 Gallon Aluminum Fuel Cell to be provided for pump engine
- One Hannay painted graphite electric hose reel to be mounted passenger side for rear deployment
- Lighted Pump Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
- Auxiliary Pump Control Panel with pressure gauge, throttle, start button, and low oil psi light and mini water tank level gauge mounted in cab console
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” Discharge mounted in walkway
- One 1.5” Discharge with Valve, chrome adapter, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- One Akron 3462 Forestry Monitor, mounted to front bumper, Monitor to have in cab controls mounted in center console
- One Cascade “Foam Flo” Class “A” Foam System with Flush Port for Garden Hose
Equipment:
- One 150’ x 1” Booster Hose for Hose Reel
- Three 1” TFT Bubble Cup 10/24 Nozzles with Pistol Grip
- Three 50’ x 1 ½” Fire Hose
- One 1 ½” Protek Adjustable Gallonage Pistol Grip Nozzle
- Three PAC nozzle Brackets
- Service Manual
- One 1 ½” x 2-1 ½” gated wye with 1 ½ x 1” reducers for whip lines
- Two 8’ x 1” whip lines
- Spare Tire & Wheel & 6 ton jack