Chassis: add ons
- Front End Replacement Style Brush Guard with Winch Cradle
- Forney Custom Reflective Striping
- Forney Fire Department Lettering with Kaufman County ESD #6 Emblem
- Rear Chevron Striping
- NFAB Side Step Bars with drop loops
- Chassis: Buckstop Version 2.1 Premium Super Single Conversion
- Speedometer Calibration Module
- High Arch Fender Flares and Body Modification Kit
- Five (5) 20X11 Aluminum DOT Compliant Wheels
Five (5) 335/80r20 Continental Tires
3-1/2” Coil Springs
Radius Arms
Heavy Duty Track Bar Mount
Shock Absorbers Premium Nitrogen, 35mm shaft, 10 Stage Valve
Front Heavy Duty Sway Bar
Adjustable Track Bar
2 Stage Soft-stop Springs
Adjustable Track Bar - Spare Tire & Wheel to be mounted on top of water tank
Body:
- Custom Flatbed Aluminum Body, 114” Long X 96” Wide
- Headache rack light bar mounting with Lightbar Protection Cage
- Strap Step at each walkway entrance
- Walkway at front of body with Self Closing gates at each end
- Rear Bumper with receiver tube
- One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door
- One Adjustable shelf in passenger side compartment
- One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with dual lift up doors
- Rear Underbody Compartment with drop down door
- One Aluminum Stamped Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment with side lift up door
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1-Plastix Plus Console with storage box and padded arm rests
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red/Amber LED Lower Rear Warning Lights
- 2-Whelen M4 Duo Series Red / White LED Lower Front Warning Lights
- 2-Whelen ION Trio Series Red / White / Blue LED Rear Side Warning Lights
- 2-Whelen ION Trio Series Red / White / Blue LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Duo Series Red / White LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series Back Up LED Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen CENCOM Carbide Amplifier with Switch Box
- 1-Whelen 56” Justice LED Light Bar with Takedown and Alley Work Lights
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen Nano6 Pioneer LED Work Lights Mounted at rear of tank
- 2- Whelen PSL1BB Pioneer LED Driving Lights Mounted at front bumper
- 2-Whelen Nano6 Pioneer LED Work Lights Mounted at headache rack
- 3-Maxima LED Compartment Lights
- 2-Maxima LED Step Lights in Walkway
- 2-Stream Light Survivor LED Flash Lights mounted to rear of console
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at driver side near cab
- 1-Whelen Back-up alarm
- 1-Warn ZEON-12S 12000 lb. front mounted electric winch with synthetic rope
- 1-FRC Back Up Camera with color monitor
- 1-Install customer supplied radio and antenna
Skid:
- 400-gallon Poly Water Tank with 10 Gallon Foam Cell and Limited Lifetime Warranty
- Rowe RPM2/K19 Pump with Kohler 19HP Electronically Fuel Injected Gasoline Engine
- Pump to be plumbed to chassis fuel tank
- One Hannay Electric Hose Reel Painted Black and Mounted for Rear Deployment
- Lighted Control Panel with pressure gauge, throttle, start button
- Class 1 Electronic LED water level Indicator with Mini Water LED tank level in cab
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” discharge at bulkhead with gated wye for whip lines
- One 1.5” Discharge with Valve, chrome adapter, cap & chain
- One 2.5” Discharge with Valve, chrome adapter, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- One Cascade “Foam Flo” Around the pump Class “A” Foam System
- Two front spray nozzles at front bumper corners with electric valves controlled in the cab
Equipment:
- One Hydrant & Spanner Set mounted to rear of driver side tool cabinet
- Two 1” x 8’ Whip lines
- Three TFT 1” Dual Gallonage Pistol Grip Nozzles
- Three PAC Nozzle mounting brackets
- One 150’ x 1” Booster Hose
- One Hose Reel Crank
- One Winch Controller
- One Winch Pull Strap