Chassis:
- 2021 Ford F550 Super Cab, 4×4, (see SW Ford Spec Sheet for more detail)
- 179” Wheelbase with 60” CA and 19,500 GVWR
- 7.3L V8 Gasoline Engine and Electronic Shift on the Fly 4×4
- Power Equipment Group
- Heavy Service Front Suspension
- 10 Speed Automatic Transmission and Limited Slip Rear End / 4.88 Axle Ratio
- Transfer Case Skid Plates
Chassis: Super Single Conversion
- Five 20X10 Forged aluminum wheel assembly powder coated black
- Five Continental 335/80R20 MPT81 Tires
- 2017 Gears, Dana 300, 6:17 Ratio
- 2017 Gears, Dana 60, 6:17 Ratio
- Gear Installation Kit
- Speedometer Correction Computer
- Front and Rear 2.5” Lift Kit
- Front and Rear Fox Shocks specifically made for 2.5” lifted F550
- Front Custom Fender Flares with Line-X
Chassis Add On’s:
- Front End Replacement Style Brush Guard with winch mount
- AMP Power Steps for Super Cab
- 4” Reflective Striping with Rear Chevron Striping
- Jackson County ESD#1 with LaWard VFD Patch and Brush 85 on the fenders
- Custom Rear Poly Cabinet in Rear passenger area for gear and SCBA Storage
Body:
- Custom Flatbed Aluminum Body, 114” Long X 96” Wide
- Headache rack light bar mounting & Lightbar Protection Cage
- Walkway at front of bed with inward opening gates at each side
- One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door
- One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with Single lift up door
- One Aluminum Stamped Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment with side lift up door
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- Rear Underbody Storage Compartment with drop down door
- Tube Style Rear Bumper with 2” receiver tube
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1-Havis Console for Siren amplifier / switch control, Joy Stick, and pump controls
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red / Amber LED Rear Lower Warning Lights
- 2-Whelen M4 Series Red LED Lower Front Warning Lights
- 2-Whelen ION Series Red LED Rear Side Warning Lights
- 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Series Red LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series Back Up LED Lights
- 5-Sound Off 2” LED Red Marker Lights
- 2-Sound Off 2” LED Amber Marker Lights
- 1-Whelen 295SLA6 Siren Amplifier & Switch Box
- 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
- 2-Whelen Nano6 Pioneer LED Driving Lights Mounted at front bumper
- 2-Whelen Nano6 Pioneer LED Work Lights Mounted at headache rack
- 5-LED Compartment Lights
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at driver side rear
- 1-Mini LED Water tank level Gauge in cab
- 1-Whelen Back-up alarm
- 1-Warn Zeon-12 12,000 lb. front mounted electric winch
- 1-FRC BCA 111A00 Backup Camera with Monitor
Skid:
- 400-gallon Poly Tank with 15 gallon integral foam cell and Limited Lifetime Warranty
- Hale HPX200-B18 pump with Briggs & Stratton 18HP Gasoline Engine & exhaust Primer
- Pump plumbed to the chassis fuel tank
- One Hannay Electric Hose Reel Painted Graphite and Mounted for Rear Deployment
- Rear Lighted Control Panel with pressure gauge, choke, throttle, start button, & Class 1 Electronic LED water level Indicator
- Hale Auxiliary Pump Control Panel located in the cab with pressure gauge, choke, throttle, start button
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” Discharge at bulkhead with gated wye for whip lines
- One 1.5” Discharge with Valve, chrome adapter, cap & chain
- One 1” Discharge Valve for Tank Fill / Re-Circulate
- One 1” Discharge Valve for Hose Reel
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- Cascade “Foam Flo” Around the Pump Class “A” Foam System
- Two Bumper Mounted Ground Spray Nozzles with Electric Valves controlled in the cab
- One Akron 3462 Bumper Monitor with joy stick controls in the cab
Equipment:
- Two 1” x 8’ Whip lines
- Three TFT 1” Dual Gallonage Pistol Grip Nozzles
- 150’ x 1” Booster Hose
- Three Nozzle Mounting Brackets
- Two ZICO SCBA Brackets with Collision Restraint Straps
- Winch Controller
- Winch Pull Strap
- Wildfire Service Manual