Chassis: Add Ons
- Front End Replacement Style Brush Guard with 2” Receiver
- Black Step Bars for Regular Cab
- City of Marlin Fire Dept Striping & Graphics
- Chevron Striping on rear of Body
- Chassis: DBL Super Single Conversion:
- Five 20 x 10 Forged Aluminum Wheel Assemblies Powder Coated Black
- Five Continental 335/80R20 MPT81 Tires
- 2017 Gears, Dana 300, 6:17 Ratio
- 2017 Gears, Dana 60, 6:17 Ratio
- Gear Installation Kit
- Speedometer Correction Computer
- Front and Rear 2.5” Lift Kit
- Front and Rear Fox Shocks specifically made for 2.5” lift
- Front Custom Fender Flares
Body:
- Flatbed Aluminum Body, with Gated Walkway 114” Long x 96” Wide, Self-closing inward opening gates to be provided at each entrance
- Headache rack light bar mounting with Protective Cage
- Gated Walkway with self-closers
- Rear Bumper with receiver tube
- One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door
- PAC Track Aluminum Mounting Board in Passenger and Driver Side Compartments
- One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with single lift up door
- Rear Underbody Compartment with drop down door
- One Aluminum Stamped Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment with side lift up door
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1- Havis 3010 Console for Siren, Switch Control and Remote Pump Panel
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
- 2-Whelen M4 Series Red/White LED Lower Front Warning Lights
- 2-Whelen ION Series Red/White LED Rear Side Warning Lights
- 2-Whelen ION Series Red/White LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Series Red/White LED Front Intersector Warning Lights
- 2-Whelen M6 Series LED Brake/Tail/Turn Lights
- 2-Whelen M6 Series LED Back Up Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen CENCOM CARBIDE Siren Amplifier & Switch Box
- 1-Whelen 54” Cenator Red/Amber LED Light Bar with Takedown and Alley Work Lights
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
- 2-Whelen Nano6 Pioneer LED off road lights mounted to front brush guard
- 2-Whelen Nano6 Pioneer LED lights mounted to headache rack
- 3-Maxima LED Compartment Lights
- 2-Maxima LED step lights installed in Walkway 1-Driver side & 1-Passenger side
- 2-Maxima LED lights installed for ground lighting 1-Driver & 1-Passenger side
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at rear of body driver side
- 1-Mini LED water tank level gauge in cab
- 1-Whelen Back-up alarm
- 1-Warn 9,500 lb. Multi-Port Winch with Synthetic Rope and power connections at both the
- front & rear bumper
- 2-Telescoping Whelen Pioneer LED Scene lights mounted driver & passenger side
- 2-Streamlight Survivor LED Rechargeable Flashlight mounted to rear of console
- 1-FRC Wired Back up Camera w/ 7” Screen mounted in cab.
Skid:
- 300-gallon Poly Water Tank with Limited Lifetime Warranty,
- Hale HPX200-B18 Pump with Briggs & Stratton 18 HP Gasoline Engine
- Guzzler Hand Primer
- Pump plumbed to chassis fuel tank
- Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
- One Hale Remote Pump Panel with Start, Stop & Throttle, pressure gauge, and choke located in cab
- One Hannay Electric Hose Reel Painted Black and Mounted for Rear Deployment
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” Discharge at bulkhead with gated wye for whip lines
- One 1.5” Discharge with Valve with 1 ½” x 1” chrome reducer, cap & chain
- One 2.5” Discharge with Valve with 2 ½” x 1 ½” chrome reducer, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- One 3462 Akron Bumper Mounted Forestry Monitor with Joy Stick Controls in the cab
- Two front corner bumper spray nozzles with electric valves controlled in the cab
Equipment:
- Two 1” x 8’ Whip lines
- Three 1” TFT Dual Gallonage Pistol Grip Nozzles
- Three Nozzle Mounting Brackets
- One 150’ X 1” Booster Hose
- One Battery Charger Pigtail
- One Hose Reel Crank
- One Winch Controller
- One Winch Pull Strap
- One Wildfire Service Manual