Mertens, Texas

Chassis:

  • 2017 Regular Cab 4×4 Ford with XL Trim painted Ford Race Red
  • 60” CA with 19,500 lb. GVWR
  • 6.7L Power Stroke Diesel Engine

Chassis ADD ONS:

  • Stainless Steel Wheel Simulators
  • Front End Replacement Style Brush Guard with Receiver Tube
  • Flat Black Body Wrap
  • Rear Chevron Striping
  • 4” White Reflective Striping
  • Mertens VFD Emblems on each front door and on the rear of the driver side compartment
  • BRUSH 222 on front fenders
  • 222 on chevron rear passenger side
  • Large 222 on ROOF

Body:

  • Flat Bed Aluminum Body, 114” Long x 96” Wide, to include gated walkway with self closers
  • Rear Bumper with receiver tube.
  • One Aluminum Tool Box 30”T x 20”D x 48”L with single lift up door mounted on passenger side.  This tool box to have PAC Track.
  • One Aluminum Tool Box 24”T x 20”D x 72”L with single lift up door mounted on driver side
  • One Aluminum Tool Basket 12”T x 20”D x 72”L with side opening door
  • One Aluminum Hose Tray mounted on driver side with capacity of 150’ or 1 ½” fire hose.
  • Rear Tow Hooks mounted to chassis frame rails
  • Turtle Tile to be installed in both tool compartments, the tool basket and the hose tray

Electrical:

  • 1-Havis C2410 Console with 13” map book storage, Arm rests, cup holders
  • 1-Wildfire 225 Amp Relay with Master Disconnect Switch
  • 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
  • 2-Whelen M4 Series Red/White LED Lower Front Warning Lights
  • 2-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
  • 2-Whelen M4 Series Red LED Intersector Warning Lights
  • 2-Whelen M6 Series Brake/Tail/Turn LED Lights
  • 2-Whelen M6 Series LED Back Up Lights
  • 5-Whelen 2” LED Red Marker Lights
  • 2-Whelen 2” LED Amber Marker Lights
  • 1-Whelen 295SLSA6 Siren Amplifier & Switch Box
  • 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
  • 1-Whelen SA315P Siren Speaker with mount
  • 2-Whelen Nano 6 LED Work Lights mounted at rear of water tank
  • 2-Whelen Nano 6 LED Work Lights mounted at headache rack corners
  • 1-Whelen 10” Continuum on front bumper
  • 2-Whelen 2” LED step lights with black flanges
  • 8-Whelen LED Compartment Lights
  • 1-Kussmaul Battery Charger with Super Auto Eject to include 40 amp circuit breaker, rubber seal and USB port
  • 1-Whelen Back-up alarm
  • 2-Stream Light Survivor Rechargeable Flashlights on rear of console
  • 1-Tele Scene Light mounted in walkway
  • 1-Kenwood Radio with matching faceplate to be installed in console to include antenna and coax cable
  • 1-Fire Com 210 Intercom with multiuser wireless base, interface cable and two wireless headsets 

Skid Unit:

  • 300 gallon poly water tank with 10 gallon foam cell
  • 1-Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 electronic water level indicator
  • Brass water service valves with Stainless steel block manifold and Victaulic couplings
  • One 1 ½” discharge at walkway with 1 ½” x 2-1 ½” gated wye for whip lines
  • One 1 ½” discharge with valve, chrome adapter, cap and cable
  • One 2 ½” discharge with valve, chrome adapter, cap and cable
  • One 1” Tank Fill / Re-Circulate valve
  • One 2 ½” Suction Valve
  • One 2 ½” Tank to pump valve with chrome swivel adapter, plug and cable
  • 1-Aluminum Fuel Tank mounted passenger side between pump engine and hose reel
  • 1-Hannay Electric Hose Reel with Roller Assembly (Graphite in color) # EF26-25-26LT mounted passenger side for rear deployment
  • 1-Cascade Foam Flo “Around the Pump” Foam System
  • 2-Bumper spray nozzles with electric valves controlled in the cab

Equipment:

  • 150’ of 1” Booster Hose
  • Two 8’ x 1” whip lines
  • One Spanner Hydrant Wrench
  • One Hose Reel Crank
  • One Spare Tire and Wheel
  • One Kussmaul Charger pigtail
  • Replace all three 1” nozzles with TFT dual gallonage pistol grip nozzles
  • Three 50’ x 1 ½” fire hose loaded in hose tray (if 150’ will fit)
  • One Protek 366 1 ½” adjustable gallonage pistol grip nozzle
  • One Stihl MS250 chain saw with Extra chain, two bar oil, two fuel
  • Two pails of class “A” foam
  • Four SCBA brackets 
  • One Haligan bar with two 1003-HD PAC brackets mounted in compartment
  • One 6’ Rubbish Hook mounted on top of tool basket with two 1004 PAC Brackets
  • One 6’ Pike Pole mounted on top of tool basket with two 1004 PAC Brackets
  • One 24” Bolt Cutters mounted in compartment with two 1003 PAC Brackets
  • One Flat Head Axe mounted in compartment with two 1003-HD PAC Brackets
  • One LH Flat Shovel
  • One LH Pointed Shovel
  • Two Fire Rakes to be put in tool basket
  • Two Fire Brooms to be put in tool basket
  Related
  • No related posts found.