Mont Belvieu, Texas

Chassis: See Southwest Ford Chassis Spec for more detail

  • 2020 F450 XL, Super Cab, 60 CA, Painted Ford Oxford White
  • 16,500 GVWR
  • 7.3L V8 Gasoline Engine
  • Limited Rear Slip 4.30 Ratio
  • Electronic Shift-On-The-Fly Four Wheel Drive
  • Heavy Service Front Suspension

Chassis:

  • Super Single Conversion
  • Five 20 x 10 Forged aluminum wheel assembly powder coated black
  • Five Continental 335/80R20 MPT81 Tires
  • Five Internal Rubber Beadlock
  • 2017 Gears, Dana 300, 6:17 Ratio (Ford Motor Co Approved)
  • 2017 Gears, Dana 60, 6:17 Ratio (Ford Motor Co Approved)
  • Gear Installation Kit
  • Speedometer Correction Computer
  • Front and rear 2.5” Lift Kit
  • Front and Rear Fox Shocks specifically made for 2.5” lifted F450 & F550
  • Front Custom Fender Flare with Line-X coating

Chassis: Add Ons

  • Front End Replacement Style Brush Guard with Receiver Tube
  • Warn 10,000 LB Electric Multi Mount Winch w/Cradle, Front & Rear Connections
  • Rear Chevron Lime/Red Striping
  • Black Side Step Bars
  • Install custom poly insert in rear passenger area, to be used for SCBA mounting

Body:

  • Flatbed Aluminum Body with Gated FF Platforms 114” Long X 96” Wide, Self-closing inward opening gates to be provided
  • Headache Rack Light Bar Mounting
  • Strap Step at each Gate
  • Rear Tow Hooks
  • Rear Tube Style Bumper with Receiver Tube
  • Aluminum Tool Compartment 18”T x 20”D x 72”L with single lift up door & gas shocks mounted on driver side
  • Aluminum Tool Compartment 18”T x 20”D x 48”L with single lift up door & gas shocks mounted on passenger side
  • Aluminum Stamped Side Opening Tool Basket 12”T x 20”D x72”L with single lift up door mounted on driver side body
  • Aluminum Stamped Side Opening Tool Basket 12”T x 20”D x48”L with single lift up door mounted on passenger side body
  • Pack Track mounting board in each compartment
  • Aluminum Hose Tray 12”T x 72”L x 4”W mounted on drivers side body between basket and tank

Electrical:

  • 1-Master Disconnect Switch
  • 1-Havis Plastix Plus Console for mounting of Siren & Switch Control
  • 1-Whelen 54” Legacy LED Lightbar with Takedown and Alley Work Lights
  • 2-Whelen M6 Series Red / Amber LED Rear Warning Lights
  • 2-Whelen M4 Series Red LED Lower Front Warning Lights
  • 4-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen M4 Red LED Front Intersector Warning Lights
  • 1-Whelen Cen-Com Siren Amplifier & Switch Control
  • 2-Whelen M6 LED Stop, Tail, Turn Lights
  • 2-Whelen M6 LED Backup Lights
  • 5-Whelen 2” LED DOT Red Marker Lights
  • 2-Whelen 2” LED DOT Amber Marker Lights
  • 1-Whelen SA315P Siren Speaker with mount
  • 2-Whelen NANO 3 LED Work Lights mounted at rear of tank
  • 1-Rigid 20” Off Road Light mounted to front bumper
  • 1-Whelen Back-up alarm
  • 1-Rechargeable Flash Light mount in the cab
  • 1-Install Customer Supplied Motorola Radio, Speaker & Antenna

Skid:

  • 300-gallon Poly Water Tank with Limited Lifetime Warranty
  • Rowe RP2/K19 Kohler 19HP Fuel Injected Gasoline Engine (100 GPM & 150PSI)
  • Hannay Graphite Painted Electric Hose Reel Mounted for Rear Deployment on Passenger Side.
  • Pump Fuel Plumbed to Chassis Fuel Source
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator with Mini Tank Level Gauge in Cab
  • Brass Water Service Valves & Stainless-Steel Block Manifold & Plumbing
  • One 1.5” Discharge in walkway with 1 ½” gated wye with 1 ½” x 1” reducers for whip-lines
  • One 1.5” Discharge with Valve, chrome adapter, cap & chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain
  • One Aluminum Hose Tray w/Capacity to hold 150’ x 1.5” Fire Hose
  • Two Ground Spray Nozzles mounted on front brush guard; Spray Nozzles controlled by
  • Electric Valves and switched from inside the cab

Equipment:

  • One Hydrant & Spanner Wrench Set
  • One 100’ x 1” Light Weight Booster Hose
  • Two 8’ x 1” Whip Lines
  • Three 1” TFT Dual Gallonage with Pistol Grip
  • Three PAC Nozzle Mounting Brackets
  • One TFT Pro Pak with Mounting Bracket & 25’ Hose Extension
  • Customer to Supply SCBA mounting brackets for cab console
  Related
  • No related posts found.