NAVARRO COUNTY ESD #1
Chassis ADD ONS:- Front End Replacement Style Brush Guard with Winch Cradle
- Nerf/Step bars for super cab
- 4” Reflective Striping
- Navarro County ESD #1Fire Department Lettering
- Rear Chevron Striping
- 11 ft. Flatbed Aluminum Body, 132” Long X 96” Wide,
- Headache rack light bar mounting with light bar protection
- Gated FF platform with self closers
- Steel Tube Style Rear Bumper
- One Aluminum Tool Box 24t” x 20d” x 72L” mounted on passenger side with Dual lift up doors
- One Aluminum Tool Box 24”t x 18”d x 72”L mounted on driver side with Dual lift up doors
- One Aluminum Stamped Tool Basket 12”t x 20”d x 72”L mounted on passenger side compartment
- One Aluminum Stamped Tool Basket 12”t x 16”d x 72”L mounted on driver side compartment
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- One Vinyl hose bed cover
- One Rear under body storage approximately 80” long between frame rails with single drop down door
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
- 1-Havis C2410 Console with 13” map book storage
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 6-Whelen M6 Series Red LED Rear Warning Lower Lights
- 4-Whelen M4 Series Red LED Lower Front Warning Lights
- 2-Whelen ION Series Red/White LED Rear Side Warning Lights
- 2-Whelen ION Series Red/White LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Series Red LED Intersector Warning Lights
- 2-Whelen M6 Series Brake/Tail/Turn LED Lights
- 2-Whelen M6 Series Back Up LED Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen 295SDA1 Remote Siren Amplifier & Switch Box
- 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
- 1-Takedowns and Alleys to flash in emergency mode
- 1-Traffic Arrow to be programmed in rear of light bar
- 2-Whelen SA315P Siren Speakers with mount
- 2-Whelen NANO 3 LED Work Lights Mounted at rear of tank
- 2-Rigid 10” E-Series LED Off Road Lights Mounted at front bumper
- 2-Telescoping Pole with Whelen Pioneer LED Scene Light
- 2-Whelen 2” LED step lights one at each FF platform
- 8-Whelen LED Compartment Lights
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at left rear of body
- 1-Whelen Back-up alarm
- 1-Warn 12000 lb Front mounted electric winch
- 2-Streamlight Survivor LED Rechargeable Flashlights mounted
- 2- Streamlight E-Spot Firebox mounted
- 1-Fire Com single radio Intercom Systems with two wireless headsets
- 400 gallon Poly Tank with 20 gallon integral foam cell & Limited Lifetime Warranty
- Hale HPX 200 Pump-175 gpm @ 135 psi / 200 gpm @ 100 psi / 300 gpm @ 25 psi Kohler 40 HP Gasoline Engine plumbed to 6 Gallon fuel source
- Control Panel with light, pressure gauge, throttle, choke, primer, start button
- Water Cooled 60 CFM Vanair rotary screw compressor
- Foam Pro 1601 foam injection system
- Stainless Steel Plumbing with water service valves
- One 2.5” Plain Water Discharge
- One 1.5” Solution Water / Plain Water Discharge
- One 1.5” CAFS / Solution Water / Plain Water Discharge
- Two 1” Discharge Valves at front of tank for whip lines CAFS / Solution Water / Plain Water
- One 1” CAFS / Solution Water / Plain Water Discharge Valve for Hose Reel
- One 1” Tank Fill / Re-Circulate
- One 2.5” Suction Valve Chrome Cap & Chain
- One 2.5’ Plain Water Discharge
- One 3/8” Re-Circulation Line
- One Hannay Painted Electric Hose Reel mounted passenger side for rear deployment
- One Akron 3462 (CAF capable) Bumper mounted monitor with joystick controls in the cab
- One LED Tank Level gauge at Control Panel
- One LED Tank Level gauge at Walkway
- One mini LED Tank Level gauge in the cab
- Three PAC nozzle brackets
- One 100’ x 1” Booster Hose
- One 1 1/2” TFT CAF nozzle
- Two 8’ x 1” Whip Lines
- Two 1” TFT CAF nozzles
- One Akron 1499 1 1/8” Smooth Bore CAF Tip for Bumper
- Three 1 ½” x 50’ Sections of DJ Fire Hose
- One Square Head Shovel
- One Round Head Shovel
- One Pick Head Axe
- One Flat Head Axe
- Two Fire Beaters (Flappers)
- One Basic First Aid Kit
- One Igloo 5 gallon water cooler with mounting rack
- One Spanner/Hydrant Wrench Set
- One 30” Halligan Bar
- One 30” Bolt Cutters
- One 2 ½” Double Female
- One 2 ½” Double Male
- One 2 ½” x 1 ½” Double Female
- One 1 ½” Double Male
- One 1 ½” Double Female
- One 2 ½” FNST x 1 ½” MNST reducer
- One 1 ½” FNST x 1” MNST reducer
- One 1 ½” FNST x male GHT reducer
- Two 1” Twist Shut Off Nozzles 10/24 GPM