Orlando, Oklahoma

Chassis:

  • 2015 International 7400 SFA 4×4 with 191” WB and 90” CA & 35,000 lb. GVWR
  • Two front frame mounted tow hooks
  • 20” front bumper extension
  • Meritor MX-12-120HR 12,000 lb. driving axle
  • 12,000 lb front suspension with shock absorbers
  • 23,000 lb rear suspension
  • Air brakes with ABS and Air dryer
  • 13.2 CFM Bendix Air Compressor
  • Tilting Steering Column with 18” Two spoke steering wheel
  • Horizontal exhaust system
  • 190 Amp Leece Neville Alternator
  • Back Up Alarm
  • AM/FM Radio with speakers
  • Max Force 9 Diesel Engine 330 HP @ 2000 RPM
  • Engine Block Heater
  • Heater shut off valves
  • Allison 3000 EVS Transmission
  • Driver Bucket Seat with Passenger Bucket
  • Power Window and Door Locks
  • 70 Gallon Fuel Tank
  • Four Goodyear 12R22.5G G622 Tires on 22.5” Load Range H
  • Two Goodyear 12R22.5G G622 Tires on 22.5” Load Range H

Chassis Add Ons:

  • 4” Reflective Striping with Orlando VFD Lettering
  • Lime/Red Chevron Striping
  • Custom Heavy Duty Brush Guard (No Winch)
  • Paint wheels red to match cab

Body:

  • 12 ft Steel Flatbed Body with Gated FF Platforms 144” Long X 102” Wide
  • Flatbed body, FF Platforms, Walkway, and Rear Step to have non-skid material
  • Gates to be outward opening and Orland VFD to approve latches
  • One Aluminum Compartment 30”t x 20”d x 72”L mounted on passenger side with Double Lift Up Doors Double doors, T-handles, gas shocks and turtle tile
  • One Aluminum Compartment 30”t x 20”dx 72”L mounted on driver side with Double Lift Up Doors & T-handles, gas shocks and turtle tile
  • One Aluminum Stamped Style Tool Basket 12”t x 20”dx 72”L mounted on passenger side tool box
  • One Aluminum Stamped Style Tool Basket 12”t x 16”dx 72”L mounted on driver side tool box
  • One Aluminum Hose Tray with a capacity of 150’ of 1 ½” fire hose
  • One rear underbody storage
  • Four Cable Steps
  • Headache Rack Lightbar Mounting
  • Rear Tow Hooks

Electrical:

  • 1-Havis C-3010 Console with arm rests, storage box, and equipment brackets
  • 1-225 Cole Hearsee Relay Master Disconnect Switch
  • 1-Whelen 295SLSA6 Siren Amplifier with Switch Control
  • 1-Whelen SA315P Siren Speaker with mounting bracket
  • 1-Whelen Liberty 54” 16 LED Light Bar with Front Work Lights & Alley Lights
  • 2-Whelen 700 Series, One Red & One Blue LED Lower Front Warning Lights
  • 2-Whelen M6 Series Red/ Amber LED Lower Rear Warning Lights
  • 2-Whelen ION Series Red LED Front Intersector Lights
  • 2-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen ION Series Blue LED Mid-Ship Side Warning Lights
  • 5-Whelen Red LED marker lights with grommets
  • 2-Whelen Amber LED marker lights with grommets
  • 2-Whelen NANO 3 LED Work Lights Mounted at Rear of Tank
  • 2-Whelen C1F 10” Continuum Super LED off road light bars mounted on Brush Guard
  • 8-Whelen LED Compartment Lights
  • 2-Streamlight Box light Orange rechargeable Flashlights Mounted in cab
  • 1-Kussmaul Battery Charger with Super Auto Eject
  • 2-Telescoping Poles with Whelen Pioneer LED Flood Lights, mounted to bulkhead
  • 1-Radio antenna mounted, mount customer supplied radio

Skid Unit:

  • 800 gallon Poly Tank (36”H x 56”W x 91”L) with 10 gallon integral foam cell and Limited Lifetime Warranty
  • Hale HPX 200-B18 with 18 HP Briggs & Stratton Gasoline Engine with Exhaust Primer
  • One Hannay Painted Electric Hose Reel mounted passenger side for rear deployment with 150’ of booster hose
  • One Hannay Painted Electric Hose Reel mounted driver side for rear deployment with 300’ of ¾” hose
  • 6 Gallon Pump Fuel cell in Poly Housing,
  • Lighted Control Panel at the walkway with pressure gauge, throttle, choke, primer, start button,
  • Class 1 Intelli-Tank LED tank level gauge
  • NO pump controls at rear of truck
  • One Auxiliary Pump Control Panel located in the cab to include Start, Stop, Throttle, Mini LED Tank Level Gauge and Joy Stick mounted in cab
  • Brass Water Service Valves with Stainless Steel Manifold and Plumbing
  • Cascade “Foam Flo” Class “A” Foam System
  • One 1 ½” Discharge with Gated Wye mounted on bulkhead with two 8’ x 1” whip lines
  • One 1.5” Discharge with Chrome Adapter, Cap & Chain
  • One 2.5” Discharge with Chrome Adapter, Cap & Chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 2.5” Tank to pump Valve
  • One 2.5” Suction Valve with Chrome Swivel Adapter, Plug & Chain
  • Two Front Ground Spray Nozzles with electric valves and in cab controls
  • Front Bumper Mounted Akron 3462 Forestry Monitor, with Joystick controls in the cab

Equipment:

  • Nine PAC brackets with Three for nozzles, two each for pike poles, & two for haligan bar
  • 150’ x 1” Booster Hose
  • 150’ x 1.5” Double Jacket Fire Hose
  • Three 100’ x ¾” Kochek BS station hose with ¾” GHT connections
  • Three 1” TFT adjustable gallonage nozzles with pistol grip
  • One 3/4” twist shut off nozzle with ¾” GHT connection
  • One Protek 1.5” Adjustable Gallonage Pistol Grip Nozzle
  • One Hydrant/Spanner Wrench Set with mount
  • Four ZICO KD-UH-6-SF-CRS SCBA Brackets
  • One 6’ Pike Pole
  • One 10’ Pike Pole
  • One Haligan Style Forcible Entry Tool
  • One 20 lb ABC Dry Powder Extinguisher with mounting bracket
  • One Drip Torch with mounting bracket
  Related
  • No related posts found.