Parker County ESD #3, Texas

Chassis:

  • 2022 Ram 5500 Crew Cab 4×4 Flame Red with 60” CA
  • Super Single Conversion
  • Five 20X10 Forged aluminum wheel assembly powder coated black
  • Five Continental 335/80R20 MPT81 Tires
  • Speedometer Correction Computer
  • AEV Front Custom Fender Flares
  • 2.5” Lift from Wicked Mfg.
  • Chassis: Add Ons
  • Front End Replacement Style Brush Guard with winch mount
  • NFAB Black Step Bars for Crew Cab with drop loops
  • Two Front Tow hooks
  • Top half of cab wrapped
  • Parker County ESD #3 Reflective Striping on Cab, Body,
  • Parker County ESD #3 Lettering
  • Yellow / Red Rear Chevron Striping to include rear faces of compartments

Body:

  • Flatbed Aluminum Body, 114” Long X 96” Wide,
  • Headache rack light bar mounting with light bar protection cage
  • Walkway at front of bed with gates using self-closers
  • Rear Underbody Storage with drop down door
  • 8” Wide Black Pipe Style Rear Bumper with receiver tube
  • One Aluminum Tool Box 30”T x 20”D x 78”L mounted on driver side NO center bulkhead divider
  • and dual lift up doors and gas struts. Adjustable shelf in each section of compartment
  • One Aluminum Tool Box 30”T x 20”D x 78”L mounted on passenger side with NO center bulkhead divider to include dual lift up doors and gas struts. Adjustable shelf in each section of compartment
  • One Aluminum Hose Tray 10”T x 20”D x 78”L with single lift up door and gas struts, drop down rear door for hose deployment,  to be mounted on driver side compartment
  • One Aluminum Stamped Tool Basket 10”T x 20”D x 72”L with side lift up door mounted on passenger side compartment
  • One Aluminum Stamped Style Tool Basket 12”T x 44” x 44” mounted on top of water tank
  • Rear Tow Hooks to chassis frame rails
  • Two Strap Steps one mounted at each walkway entrance
  • Turtle Tile shall be in each compartment and hose tray

Electrical:

  • 1-Havis console with arm rests, cup holder, storage box & equipment face-plates
  • 1-Wildfire 225 Amp Relay with Master Disconnect Switch
  • 2-Whelen M4 Series Red/Blue LED Lower Front Warning Lights
  • 2-Whelen ION Series Red/Blue with White override LED Rear Side Warning Lights
  • 2-Whelen ION Series Red/Blue with White override LED Mid-Ship Side Warning Lights
  • 2-Whelen M4 Series Red/Blue LED Intersector Warning Lights on brush guard
  • 2-Whelen M6 Series Red/Blue LED Lower Rear Warning Lights
  • 2-Whelen M6 Series Red/Blue LED Upper Rear Warning Lights
  • 2-Whelen M6 Series Brake/Tail/Turn LED Lights
  • 2-Whelen M6 Series Back Up LED Lights
  • 2-Whelen M6 Series Upper rear facing scene Lights
  • 2-Whelen Nano6 Pioneer LED Work Lights Mounted at Hose Reel Frame
  • 5-Whelen 2” LED Red Marker Lights
  • 2-Whelen 2” LED Amber Marker Lights
  • 1-Whelen Cencom Carbide Siren Amplifier & 21 button Switch Box
  • (Note: slide switch position #3 to include activating the siren)
  • 1-Whelen SA315P Siren Speaker with mount
  • 1-Whelen 56” Justice LED Light Bar with Takedown & Alley Work Lights 
  • 2-Whelen Nano6 Pioneer LED Work Lights Mounted at headache rack
  • 8-Maxima LED Compartment Lights
  • 1-Kussmaul Battery Charger with Blue Sea Super Auto Eject mounted driver side rear
  • 1-Mini LED water tank level indicator mounted in cab
  • 1-Class 1 LED water tank level indicator mounted in walkway
  • 1-Whelen Back-up alarm
  • 1-Warn M12 12,000 lb. front mounted electric Winch with synthetic rope
  • 2-Whelen PSL1BB Pioneer LED Driving Lights Mounted at front bumper
  • 1-Rigid 20” Lightbar mounted to front end replacement
  • 2-Stream-Light Survivor SL90LED Rechargeable Flash Lights mounted in the cab
  • 2-Maxima LED step lights one at each firefighter platform
  • 1-RXP / Hypersight Forward looking Thermal Imaging Camera with back up camera and color monitor mounted in the cab
  • 1-Install Customer supplied radio, coax, and antenna
  • 1-Install Customer supplied portable radio charger

Skid:

  • 350 gallon Poly Water Tank with 10 Gallon Integral Foam cell
  • Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine with exhaust primer
  • Pump Fuel Plumbed to Chassis Fuel Tank
  • One Hannay Electric Hose Reel Painted Black in color and Mounted above pump for
  • Rear Deployment with Single Roller and Spools
  • Lighted Pump Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 LED water tank level gauge INSTALL MUFFLER BLANKET
  • Hale Auxiliary Pump Control Panel mounted at cab console with pressure gauge, throttle, choke, primer, start button
  • Akron Fire Service Valves with Stainless Steel Block Manifold Victaulic couplings
  • Discharges on manifold to have 45 degree down angles
  • One 1.5” discharge at bulkhead with 1 ½” x 2-1 ½” gated wye with 1 ½” x 1” reducers for whip lines
  • One 1.5” Discharge with Valve, with 1 ½” x 1” chrome reducer, cap & cable
  • One 1.5” Discharge with Valve, chrome adapter, cap & cable
  • One 2.5” Discharge with Valve, 2 ½” x 1 ½” chrome reducer, cap & cable
  • One 1” Tank Fill / Re-Circulate Valve
  • One 1” Hose Reel Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with 45 degree swivel adapter flange, plug & cable
  • Two front corner bumper spray nozzles with electric valves controlled in the cab

Equipment:

  • Three Ally 1” Adjustable Gallonage Pistol Grip Nozzles
  • 150’ x 1” 800 psi Booster Hose
  • 50’ x ¾” 800 psi Booster Hose
  • Two 1” x 8’ Whip lines
  • Two Hydrant & Spanner Wrench Set
  • Three PAC nozzles mounting brackets
  • Three 10’ x 1 ½” Clear Suction Hose
  • One 1 ½” foot valve and strainer
  • One 2 ½” MNST x 1 ½” MNST adapter for use with suction hose
  • One FSS Long Handle Pointed Shovel
  • One Fire Rake
  • One Pulaski Tool
  • One McCleod Tool
  • One Drip Torch with mounting bracket
  • One Wildfire Service Manual
  • One winch pull strap
  • One winch controller
  • One battery charger pigtail
  Related
  • No related posts found.