Princeton, Texas

Chassis:

  • 2019 Ford F550 Crew Cab, 4×4
  • 179” Wheelbase with 60” CA and 19,500 GVWR
  • 6.8L V10 Gasoline Engine with 240 Amp Alternator
  • Painted Ford race Red
  • Split Bench Seat 40/20/40 (Center 20 removed and replaced with equipment console)
  • 6 Speed Automatic Transmission and Limited Slip Rear End / 4.88 Axle Ratio
  • Power Equipment Group
  • Heavy Service Front Suspension
  • Transfer Case Skid Plates

Chassis: Super Single Conversion

  • Five 20X10 Forged aluminum wheel assembly powder coated black
  • Five Continental 335/80R20 MPT81 Tires
  • Five Internal Rubber Beadlock
  • 2017 Gears, Dana 300, 6:17 Ratio
  • 2017 Gears, Dana 60, 6:17 Ratio
  • Gear Installation Kit
  • Speedometer Correction Computer
  • Front and Rear 2.5” Lift Kit
  • Front and Rear Fox Shocks specifically made for 2.5” lifted F550
  • Front Custom Fender Flares with Line-X

Chassis: Add Ons

  • Front End Replacement Style Brush Guard with Receiver Tube
  • Add two lights or reflective tape to Brush Guard for point of reference
  • Black Step bars for Crew Cab
  • Custom Paint “Kona Blue” on cab and upper portion of boxes and baskets
  • 4” Blue Reflective Striping
  • Princeton Fire Dept Graphics and Lettering
  • Rear Reflective Rear Chevron (Yellow-Red)

Body:

  • Aluminum Flatbed Body 144” Long X 96” Wide
  • Body painted Race Red to match Ford chassis
  • Steel Powder Coated Rear Bumper
  • One underbody Tool Box driver side front corner approximately 12”T x 22”W x 22”D
  • One underbody Tool Box passenger side front corner approximately 12”T x 22”W x 22”D
  • One Aluminum Tool Box 24”T x 20”D x 72L” mounted on passenger side with single lift up door
  • One Aluminum Tool Box 30”T x 20”D x 72”L mounted on driver side with double lift up doors and adjustable shelf in rear section
  • One Aluminum Tool Basket 12”T x 20”D x 72”L with side opening ingle lift up door mounted on passenger side tool box
  • One Aluminum Hose Tray for 1 ½” Fire Hose inboard of driver side tool box
  • One Aluminum Tool Basket 12”T x 44” x 44” mounted on top of water tank
  • One Rear Underbody Storage with drop down door
  • Turtle Tile in each compartment
  • Headache Rack with NO Lightbar Mounting
  • Rear Tow Hooks
  • Rear Receiver Tube

Electrical:

  • 2-Whelen M6 Series LED Red/Amber Lower Rear Warning Lights
  • 2-Whelen M6 Series LED Red/Blue Upper Rear Warning Lights
  • 2-Whelen M4 Series LED Lower Front Warning Lights (one Red & one Green)
  • 2-Whelen ION Red LED Rear Side Warning Lights
  • 2-Whelen ION Green LED Mid-ship Side Warning Lights
  • 2-Whelen M4 Red LED Intersector Warning
  • 1-Whelen Inner Edge Red/Blue LED with Front Takedown Lights
  • 1-Whelen CENCOM Siren Amplifier & Switch Control
  • 1-Whelen SA315P Siren Speaker w/mount
  • 2-Whelen NANO6 LED, mounted to brush guard
  • 2-Whelen NANO3 LED Work Lights Mounted at Rear of Tank
  • 1-Whelen NANO3 LED Spot Light mounted on Bumper Monitor
  • 2-Whelen PSL1BB LED Work Lights one mounted each side on tool basket or tool box
  • 1-Plastix Plus Console
  • 1-Master Disconnect Switch
  • 2-Stream Light or Night Stick LED Rechargeable Flash Lights, mounted in cab
  • 2-Whelen M6 LED Stop, Tail, Turn Lights
  • 2-Whelen M6 LED Backup Lights
  • 4-Maxima LED Compartment Lights
  • 1-Warn Zeon-10 10,000 lb. multi mount Electric Winch with electrical connection both at the front
  •    and rear of the truck
  • 1-Install One customer Supplied Dual Band Radio and Antenna
  • 1-Compartment Door Warning light in cab with 6 switches
  • 1-GTT 794H Opticom Emitter
  • 1-Hypersight Thermal Imaging Camera with Monitor and Integral Back Up Camera

Skid:

  • 350 gallon Poly Water Tank with 20 Gallon Integral Foam Cell and Limited Lifetime Warranty
  • Rowe RPM2/K19 Pump with 19HP Kohler Electronically Fuel Injected Gasoline Engine
  • Pump plumbed to the chassis fuel tank
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button & Class1
  • Electronic LED water level indicator
  • Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
  • Two 1” Discharges at headache rack for whip lines
  • One 1” Discharge Valve for Hose Reel
  • One 1.5” Discharge Valve, with 1 ½” x 1” Reducer
  • One 1.5” Discharge Valve, with chrome adapter, cap & chain
  • One 2.5” Discharge Valve, with chrome adapter, cap & chain
  • One 1” Tank Fill /Re-Circulate Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain
  • One Hannay Painted Black Electric Hose Reel with C2 Rollers mounted driver side rear for side deployment
  • One Hannay Painted Black Electric Hose Reel with C2 Rollers mounted passenger side rear for side deployment
  • Two Front Corner Bumper Spray nozzles with electric valves controlled in the cab
  • One TFT EF1-RC Bumper Monitor with Joystick controls in the cab with front plumbing painted black
  • One Cascade “Foam Flo” around the pump class “A” foam system

EQUIPMENT:

  • Four 1” TFT Dual Gallonage Pistol Grip Nozzles
  • 150’ x 3/4” Booster Hose
  • Four Nozzle Brackets
  • Two Hose Reel Crank Handles
  • One Winch Controller
  • One Service Manual (Hard Copy)
  • One Service Manual (Electronic Copy)
  Related
  • No related posts found.