Sheridan, Texas

Chassis:

  • 2019 Ford F450 Super Cab, 4×4
  • 179” Wheelbase with 60” CA and 16,500 GVWR
  • 6.8L V10 Gasoline Engine
  • Electronic Shift on the Fly 4×4
  • Power Equipment Group
  • Heavy Service Front Suspension
  • 6 Speed Automatic Transmission and Limited Slip Rear End / 4.88 Axle Ratio
  • Transfer Case Skid Plates

Chassis Add On’s:

  • Front End Replacement Style Brush Guard with winch mount
  • Black Side Bars with Drop Loop steps for Super Cab
  • Custom Fender Flares with Line-X coating
  • 2.5” DBL Custom Lift Kit with Fox Heavy duty Shocks
  • Five 20 x 10 Forged Aluminum Wheel Assembly with internal rubber beadlock
  • Five Continental MPT81 335/80R20 Tires
  • 4” Reflective Striping with Rear Chevron Striping
  • Sheridan VFD Lettering & Striping with 1242 being the truck number
  • Custom Rear Poly Cabinet in Rear passenger area for gear and SCBA Storage

Body:

  • Custom Flatbed Aluminum Body, 114” Long X 96” Wide
  • Headache rack light bar mounting & Lightbar Protection Cage
  • Walkway at front of bed with inward opening gates at each side
  • One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door and adjustable shelf
  • One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with Single lift up door
  • One Aluminum Stamped Tool Basket 12”t x 20”d x 72”L mounted on driver side compartment with side lift up door
  • One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
  • Rear Underbody Storage Compartment with drop down door
  • Tube Style Rear Bumper with 2” receiver tube
  • Rear Tow Hooks to chassis frame rails
  • Turtle Tile shall be in each compartment and hose tray

Electrical:

  • 1-Plastix Plus Console for Siren amplifier and switch control
  • 1-Wildfire 225 Amp Relay with Master Disconnect Switch
  • 2-Whelen M6 Series Red/Amber LED Rear Warning Lower Lights
  • 2-Whelen M4 Series Red LED Lower Front Warning Lights
  • 2-Whelen ION Series Red LED Rear Side Warning Lights
  • 2-Whelen ION Series Red LED Mid-Ship Side Warning Lights
  • 2-Whelen M4 Series Red LED Intersector Warning Lights
  • 2-Whelen M6 Series Brake/Tail/Turn LED Lights
  • 2-Whelen M6 Series Back Up LED Lights
  • 5-Whelen 2” LED Red Marker Lights
  • 2-Whelen 2” LED Amber Marker Lights
  • 1-Whelen 295SLA6 Siren Amplifier & Switch Box
  • 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
  • 1-Whelen SA315P Siren Speaker with mount
  • 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
  • 2-Whelen Nano6 Pioneer LED Driving Lights Mounted at front bumper
  • 2-Whelen Nano6 Pioneer LED Work Lights Mounted at headache rack
  • 5-LED Compartment Lights
  • 1-Kussmaul Battery Charger with Super Auto Eject mounted at driver side rear
  • 1-Mini LED Water tank level Gauge in cab
  • 1-Whelen Back-up alarm
  • 1-Warn Zeon-12 12,000 lb. front mounted electric winch
  • 1-FRC BCA 211A00 Backup Camera with Monitor

Skid:

  • 400-gallon Poly Tank with 10 gallon integral foam cell and Limited Lifetime Warrant
  • Hale HPX200-B18 pump with Briggs & Stratton 18HP Gasoline Engine & exhaust Primer
  • Pump plumbed to the chassis fuel tank
  • One Hannay Electric Hose Reel Painted Graphite and Mounted for Rear Deployment
  • Rear Lighted Control Panel with pressure gauge, choke, throttle, start button, & Class 1 Electronic LED water level Indicator
  • Hale Auxiliary Pump Control Panel located in the cab with pressure gauge, choke, throttle, start button
  • Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
  • One 1.5” Discharge at bulkhead with gated wye for whip lines
  • One 1.5” Discharge with Valve, chrome adapter, cap & chain
  • One 1” Discharge Valve for Tank Fill / Re-Circulate
  • One 1” Discharge Valve for Hose Reel
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain
  • Cascade “Foam Flo” Around the Pump Class “A” Foam System
  • Two Bumper Mounted Ground Spray Nozzles with Electric Valves controlled in the cab
  • One Akron 3462 Bumper Monitor with joy stick controls in the cab

Equipment:

  • Two 1” x 8’ Whip lines
  • Two TFT 1” Dual Gallonage Pistol Grip Nozzles
  • One TFT 1” Dual Gallonage Bubble Cup Nozzle with Pistol Grip
  • 100’ x 1” Booster Hose
  • Three Nozzle Mounting Brackets
  • Two ZICO SCBA Brackets with Collision Restraint Straps
  • Two Streamlight (yellow) poly stinger led flashlights installed
  • Two Night Stick Traffic wand
  • One 1 ½” double female adapter
  • One 1 ½” double male adapter
  • One 2 ½” double female adapter
  • One 2 ½” double male adapter
  • One 2 ½” female x 1 ½” male reducer
  • One 1 ½” mount
  • One 2 ½” mount
  • One Whelen mini Cenator
  Related
  • No related posts found.