Chassis:
- 2019 F 450 Super Cab 4×4 Ford with XL Trim painted Race Red
- 60” CA with 16,500 lb. GVWR
- Triton V10 Gasoline Engine
- 40/20/40 Vinyl Split Bench seat with middle section removed for console
- 6–Speed Torque Shift Automatic Transmission with OD & Limited Slip Rear End
Chassis: Add Ons
- Front End Replacement Style Brush Guard with Winch Cradle
- Black Step Bars for Super Cab
- Wheels Painted Black
- Chevron Striping on rear of Body
- 4” White Reflective Stripe on both sides of cab and body
Body:
- Custom Flatbed Aluminum Body, 114” Long X 96” Wide
- Headache rack light bar mounting
- Gated Walkway with self-closers
- Rear Bumper with receiver tube
- One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door
- PAC Track Aluminum Mounting Board in Passenger and Driver Side Compartments
- One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with single lift up door
- Rear Underbody Compartment with drop down door
- One Aluminum Stamped Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment with side lift up door
- One Aluminum Hose Tray mounted on driver side with a capacity of 150’ of 1 ½” Fire Hose
- Rear Tow Hooks to chassis frame rails
- Turtle Tile shall be in each compartment and hose tray
Electrical:
- 1-Havis Console for siren / switch control, pump control panel, & joystick
- 1-Wildfire 225 Amp Relay with Master Disconnect Switch
- 2-Whelen M6 Series Red/Blue LED Rear Warning Lower Lights
- 2-Whelen M4 Series Red/Blue LED Lower Front Warning Lights
- 2-Whelen ION Series Red/Blue LED Rear Side Warning Lights
- 2-Whelen ION Series Red/Blue LED Mid-Ship Side Warning Lights
- 2-Whelen M4 Series Red/Blue LED Intersector Warning Lights
- 2-Whelen M6 Series LED Brake/Tail/Turn Lights
- 2-Whelen M6 Series LED Back Up Lights
- 5-Whelen 2” LED Red Marker Lights
- 2-Whelen 2” LED Amber Marker Lights
- 1-Whelen 295SLA6 Siren Amplifier & Switch Box
- 1-Whelen 55” Liberty Red/Blue LED Light Bar with Takedown and Alley Work Lights
- 1-Whelen SA315P Siren Speaker with mount
- 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
- 1-Whelen Nano3 Pioneer LED Spot Light Mounted on Bumper monitor
- 2-Whelen Nano6 Pioneer LED Driving Lights Mounted at front bumper
- 2-Whelen Nano6 Pioneer LED Work Lights Mounted at headache rack
- 3-Maxima LED Compartment Lights
- 1-Kussmaul Battery Charger with Super Auto Eject mounted at rear of body driver side
- 1-Mini LED water tank level gauge in cab
- 1-Whelen Back-up alarm
- 1-Warn 12,000 lb. Winch mounted to Front End Replacement
- 1-SETCOM single radio wireless intercom system with two headsets
Skid:
- 350-gallon Poly Tank with 10 Gallon Foam Cell & Limited Lifetime Warranty
- Hale HPX 200-B18 with Briggs & Stratton 18HP Gasoline Engine
- Cascade “Foam Flo” Around the Pump Class “A” Foam System
- Pump plumbed to chassis fuel tank
- One Hannay Electric Hose Reel Painted Graphite and Mounted for Rear Deployment
- Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
- Hale Auxiliary Pump Control Panel mounted in cab console
- Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
- One 1.5” discharge at bulkhead with gated wye for whip lines
- One 1.5” Discharge with Valve, chrome adapter, cap & chain
- One 1” Tank Fill / Re-Circulate Valve
- One 2.5” Tank to Pump Valve
- One 2.5” Suction Valve with chrome swivel adapter, plug & chain
- One Akron 3462 Forestry Monitor mounted on front bumper, with Joy Stick & Nano3 LED Spot Light
- Two Front Corner mounted bumper sprays with electric valves controlled in the cab
Equipment:
- Two 1” x 8’ Whip lines
- Three Dual Gallonage Pistol Grip Nozzles and Nozzle Brackets
- 150’ x 1” Booster Hose
- One Drip Torch Mounting Bracket