Union Valley, Texas

Chassis: 

  • 2020 F550 Super Cab 4×4 Ford with XL Trim Painted Race Red
  • 60” CA with 19,500 lb. GVWR
  • 6.7L Power Stroke Diesel Engine with Manual Re-generation over-ride
  • 200 Amp Alternator
  • 40/20/40 Vinyl Split Bench seat with middle section removed for console
  • Automatic Transmission with OD & Limited Slip Rear End

Chassis Add ON’s:

  • Front End Replacement Style Brush Guard with 2” Receiver for winch
  • Black Tubular Step Bars for Super Cab
  • Super Spring Rear Suspension enhancement system
  • 2” Front leveling kit
  • Paint Wheels black
  • 4” White Reflective Striping
  • Red / Yellow Rear Chevron Striping on rear of truck and on front bumper
  • Union Valley Fire Department Lettering with B-74

Body:

  • Custom Flatbed Aluminum Body, 114” Long X 96” Wide
  • Headache rack light bar mounting
  • Walkway at front of Body with Self Closing Gates on each end
  • Rear Tube Style Bumper
  • One Aluminum Tool Box 30”T x 20”D x 48L” mounted on passenger side with lift up door
  • Pack Track Aluminum Mounting Board in Passenger and driver side Compartments
  • One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with single lift up door
  • Rear Underbody Compartment with drop down door to fit a 72” Backboard only
  • One Aluminum Stamped Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment with side lift up door
  • One Aluminum Hose Tray mounted on passenger side with a capacity of 150’ of 1 ½” Fire Hose
  • Rear Tow Hooks to chassis frame rails
  • Turtle Tile shall be in each compartment and hose tray
  • Rear Receiver Tube
  • 1-Plastix Plus Console, Siren amplifier and switch control
  • 1-Wildfire 225 Amp Relay with Master Disconnect Switch
  • 1-Whelen CEN-COM Siren & Switch Box
  • 2-Whelen SA315P Siren Speakers with mounts
  • 1-Whelen 55” Liberty 14 LED Light Bar with Takedown and Alley Work Lights
  • 2-Whelen M6 Series Red/Blue LED Rear Warning Lower Lights
  • 2-Whelen M4 Series Red/Blue LED Lower Front Warning Lights
  • 2-Whelen M4 Series Red/Blue LED Intersector Warning Lights
  • 2-Whelen ION Series Red/Blue LED Rear Side Warning Lights
  • 2-Whelen ION Series Red/Blue LED Mid-Ship Side Warning Lights
  • 2-Whelen M6 Series Brake/Tail/Turn LED Lights
  • 2-Whelen M6 Series Back Up LED Lights
  • 5-Whelen 2” LED Red Marker Lights
  • 2-Whelen 2” LED Amber Marker Lights
  • 2-Whelen Nano3 Pioneer LED Work Lights Mounted at rear of tank
  • 2-Whelen Nano6 Pioneer LED Driving Lights Mounted at front bumper
  • 1-Rigid 20” Light on brush guard
  • 4-Maxima LED Compartment Lights
  • 2-Maxima LED Lights 1 each mounted in FF Platform area
  • 2-Streamlight Survivor LED Flash Lights mounted to rear of console
  • 1-Kussmaul Battery Charger with Super Auto Eject mounted at driver side rear
  • 1-Mini LED water tank level gauge in cab
  • 1-Whelen Back-up alarm
  • 1-Warn 10,000 lb. Electric Winch with power Connections at front and rear of truck

Skid:

  • 400-gallon Poly Water Tank with 10-gallon Poly Foam Cell and Limited Lifetime Warranty
  • Hale HPX 200 B18 with 18HP Briggs & Stratton gasoline engine
  • Hale Remote pump panel with start, stop & throttle mounted in walkway on tank
  • Exhaust Primer
  • Six-gallon fuel cell
  • One Hannay Electric Hose Reel Painted Black and Mounted Passenger Side for Rear Deployment
  • Lighted Control Panel with pressure gauge, throttle, choke, primer, start button, & Class 1 Electronic LED water level Indicator
  • Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
  • One 1.5” Discharge at bulkhead with gated wye for whip lines
  • One 1.5” Discharge with Valve, with 1 ½” x 1” chrome adapter, cap & chain
  • One 1.5” Discharge with Valve, chrome adapter, cap & chain
  • One 2.5” Discharge with Valve, chrome adapter, cap & chain
  • One 1” Tank Fill / Re-Circulate Valve
  • One 1” Hose Reel Valve
  • One 2.5” Tank to Pump Valve
  • One 2.5” Suction Valve with chrome swivel adapter, plug & chain
  • Cascade Around the Pump Class “A” Foam System
  • Two Bumper Mounted Ground Spray Nozzles with Electric Valves for in cab control, sprays to have protection guard

Equipment:

  • Two 1” x 8’ Whip lines
  • Three 361 1” Adjustable Gallonage Pistol Grip Nozzle
  • 150’ x 1” Booster Hose
  • Three Nozzle Mounting Brackets
  • One Hydrant & Spanner Set
  Related
  • No related posts found.