Zavalla, Texas

ZAVALLA VFD

Zavalla, TX

Chassis:

  • 2015 International 7400 SFA 4×4 Crew Cab Rescue Application painted Red
  • 221” Wheelbase with 90” Cab to Axle and 33,000 GVWR
  • Max Force 9 330 HP Diesel Engine & 190 Amp Leece Neville Alternator
  • Allison 3000EVS 6 Speed Automatic Transmission
  • Driver Control locking rear differential
  • Two Front Tires 12R22.5 G622 Goodyear Load Range H 16 Ply
  • Four Rear Tires 12R22.5 G622 Goodyear Load Range H 16 Ply
  • 12,000 lb Front Driving Axle & 23,500 lb Rear Suspension with 21,000 lb Rear Axle
  • Air Brakes with 13.2 CFM Air Compressor and Bendix Air Dryer with heater
  • Tilting Steering Column with 18” two spoke steering wheel
  • AM-FM Radio with two dual cone speakers
  • Single Trumpet Air Horn & Back Up Alarm
  • Engine Block Heater & 70 Gallon Fuel Tank
  • Power Windows and Door Locks
  • Air Conditioning & Air Suspension Driver Seat
  • Front passenger SCBA Seat with ZICO SCBA Bracket and Collision Restraint Strap
  • Three rear SCBA Seats with ZICO SCBA Brackets and Collision Restraint Straps
  • 22.5” Wheels painted White
  • Custom Bumper with Heavy Duty Brush Guard with Winch Mount
  • Trash line storage box with capacity of 50’ of 1 ½” Fire Hose
  • Stainless Steel Wheel Covers

Body:

  • 14 ft Aluminum Flatbed Body 168” Long X 102” Wide with Gated FF Platforms and self closing inward opening gates
  • Hand Rails to be installed on rear of tool boxes
  • One Aluminum Tool Box 30”t x 20”d x 72”L mounted on passenger side with double lift doors & one adjustable shelf mounted in front compartment.
  • One Aluminum Tool Box 30”t x 20”dx 72”L mounted on driver side with double lift doors & one adjustable shelf mounted in front compartment.
  • One Aluminum Tool Basket 12”tx 16”dx 72”L mounted on Passenger side tool box
  • One Aluminum Hose Tray 12”H x 16”W x 72”L w/divider on driver side compartment.
  • Two Aluminum Underbody tool boxes
  • Headache Rack Lightbar Mounting with Lightbar protection
  • Rear Underbody Storage with drop down door
  • Rear Frame mounted Tow Hooks
  • Rear 2” Receiver Tube
  • Four Cable Steps
  • Turtle Tile in floor of each compartment
  • PAC Track for tool mounting in rear compartment

Electrical:

  • 1-Whelen Liberty 16 LED lightbar with Takedown & Alley work lights
  • 2-Whelen PAR46S3RH PAR46 LED red with white spot light override in rubber housing front warning lights
  • 2-Whelen M4 Red/White LED Front Intersectors
  • 4-Whelen WIONR LED with IONGROM side warning lights, two rear and two midship
  • 2-Whelen M6 Series Red LED Rear Upper Warning Lights mounted on tool boxes
  • 2-Whelen M6 Series LED Scene Lights mounted upper rear
  • 2-Whelen M6K Series Red/Amber Lower LED Rear Warning Lights
  • 2-Whelen M6BTT LED stop/tail/turn Lights
  • 2-Whelen M6BUW LED backup light Lights
  • 5-Whelen T0R00MRR Red LED marker lights with grommets
  • 2-Whelen T0A00MAR Amber LED marker lights with grommets
  • 1-Whelen 295SDA1 Siren Amplifier & Switch box
  • 2-Whelen SA315P Siren Speakers & mounting bracket
  • 2-Whelen NANO3 LED work lights rear tank
  • 2-Whelen NANO6 LED driving lights mounted on front bumper and paralled to white LED in PAR 46
  • 1-Master Disconnect Switch
  • 8-Whelen LED Compartment Lights
  • 2-Whelen LED Step lights at FF platforms
  • 1-Havis C-2411 Console with Mic clips and mic clip brackets
  • 2-ROM Telescoping light pole Whelen Pioneer LED Scene Lights, mounted in walkway area
  • 2-Streamlight SL20XP/LED rechargeable Flashlights Mounted in cab
  • 1-Kussmaul 091-56-12-S-KIT charger with Super Auto Eject mounted at rear of body
  • 1-Warn 16,500# front mounted electric winch

CAFS Skid:

  • 800 gallon Poly Tank with 20 gallon integral foam cell & Limited Lifetime Warranty
  • Hale HPX 200 Pump-175gpm @ 135psi / 200 gpm @ 100psi / 300 gpm @ 25psi
  • Kubota 44 HP Diesel Engine
  • Pump to be plumbed to chassis fuel tank
  • Control Panel with light, pressure gauge, throttle, choke, primer, start button
  • LED water tank level gauge
  • Water Cooled 60 CFM Vanair rotary screw compressor
  • Foam Pro 1601 foam injection system
  • Stainless Steel Plumbing with water service valves
  • One 1.5” Solution Water / Plain Water Discharge
  • One 1.5” CAFS / Solution Water / Plain Water Discharge
  • Two 1” Discharge Valves at front of tank for whip lines CAFS / Solution Water / Plain Water
  • One 1” CAFS / Solution Water / Plain Water Discharge Valve for Hose Reel
  • One 1” Tank Fill / Re-Circulate
  • One 2.5” Suction Valve Chrome Cap & Chain
  • One 2.5’ Plain Water Discharge
  • One 3/8” Re-Circulation Line
  • One Hannay Electric Hose Reel painted graphite mounted passenger side front for side deployment plumbed for water or foam solution
  • One Hannay Electric Hose Reel painted graphite mounted on driver side front for side deployment plumbed for CAFS
  • Two front ground spray nozzles (water or foam solution) with electric valves for in cab control
  • Class 1 Water LED Level Indicator at pump controls
  • One Mini LED Tank Level Display in Cab
  • One 1 ½” Trash Line, Swivel/ Ball Valve, located in front bumper (water or foam solution)
  • One Akron 3462 Bumper mounted monitor (water or foam solution) withAdjustable Gallonage Nozzle and in-cab joy stick controls

Equipment:

  • Two 6’ x 1” Whip Lines
  • Two 100’ x 1” 800 PSI booster hose
  • One Spanner & Hydrant Wrench Set
  • One 1 ½” Pistol Grip Shut Off with 1 1/8” Smooth Bore CAF Tip
  • Three 1” Pistol Grip Shut Off with ¾” Smooth Bore CAF Tip
  • Four 50’ x 1 ½” DJ Fire Hose
  • One Protek 366 1 ½” adjustable gallonage pistol grip nozzle
  • One Protek 361 1” adjustable gallonage pistol grip nozzle
  • Two D1040 1” twist shut off nozzles
  • Four 5 Gallon Pales of Fire Stopper Class “A” Foam
  Related
  • No related posts found.