Small Brush Truck
Specs
Chassis: Add Ons
Front End Replacement Style Brush Guard with winch mount
NFAB Black Step Bars with drop loops for Crew Cab
Body Wrap Race Red to match the cab
Black Venus Fire Department Graphics and Reflective Striping
Chevron Striping on rear of Body black/red
Stryker 2.5” Lift Kit
(6) Goodyear 245/19.5 G622 Off Road Tires
Paint Steel Wheels Trim Black
Body:
Flatbed Aluminum Body, with Gated Walkway 114” Long x 96” Wide, outward opening gates to be provided at each entrance with slam latch and safety latch
8” Rear Bumper with receiver tube
One Aluminum Tool Box 30”T x 20”D x 48”L mounted on passenger side with lift up door
One Aluminum Tool Box 24”T x 20”D x 72”L mounted on driver side with single lift up door
One Aluminum open top Tool Basket 12”T x 20”D x 72”L mounted on driver side compartment
PAC Track Aluminum Mounting Board in Passenger and Driver Side Compartments
One Aluminum Hose Tray mounted on driver side inboard of tool basket
Boxes & Basket to be Black Raptor Liner
Rear Underbody Compartment with drop down door
Rear Tow Hooks to chassis frame rails
Turtle Tile shall be in each compartment and hose tray
Electrical:
1-Plastix Plus Console for Siren, Switch Control
2-Streamlight Survivor LED Flashlights mounted in the cab
1-Rigid 20” LED Off Road Light mounted at front bumper
1-Kussmaul Battery Charger with Super Auto Eject
1-Mini LED water tank level gauge in cab
1-Whelen Back-up alarm
2-Headset charging cables & hangar hooks
1-Warn M15-S 15,000 lb. front mounted electric winch with synthetic rope
Skid:
300-gallon Poly Water Tank with 10 Gallon Foam Cell and Limited Lifetime Warranty,
Rowe RPM2 / K19 Pump with 19HP Kohler EFI Gasoline Engine
Lighted Control Panels will have pressure gauge, throttle, start button
Class 1 Electronic LED water level Indicator at rear of truck
One Hannay Electric Hose Reel Painted Black and Mounted for Rear Deployment
Brass Water Service Valves with Stainless Steel Block Manifold Victaulic couplings
One 1.5” Discharge at bulkhead with gated wye for whip lines
One 1.5” Discharge with Valve, with 1 ½” x 1” chrome reducer, cap & cable
One 2.5” Discharge with Valve, chrome adapter, cap & cable
One 1” Tank Fill / Re-Circulate Valve
One 2.5” Tank to Pump Valve
One 2.5” Suction Valve with chrome swivel adapter, plug & cable
Two Front corner mounted Bumper Spray nozzles with electric valves controlled in the cab
One Cascade “Foam Flo” Class “A” Foam System